The Anton C03738 is a replacement flue gas probe for the entire Anton Sprint Pro range, from the Pro 1 through to the Pro 6. It has a solid stainless steel shaft with a built-in thermocouple, extending 250mm into the flue with an adjustable depth gauge for consistent, repeatable positioning.
An in-line water trap keeps dust and other debris out, and a PTFE filter — non-stick and resistant to clogging — provides additional protection. The connection to the hose uses a positive click connector, with a secondary water block filter protecting against moisture ingress at that connection point. The hose runs 2164mm, and the handle is ergonomically moulded for comfortable use.
This is the probe that connects to an Anton Sprint Pro analyser and draws the sample gas from the flue — the component most likely to need replacing over time, given it's exposed to combustion fumes, condensate and wear at the connection point. The straight version suits standard flue access points; if a flue test point sits in a tight spot without a clear straight run, the bent 90° version (C03738-B) is the better fit. Both use the same water trap and filtration system to protect the analyser's sensors.
As a genuine Anton part, fit and compatibility with the whole Sprint Pro range (Pro 1 through Pro 6) is guaranteed, and the filtration system matches what's needed to protect the analyser's sensors from moisture and debris over the probe's working life. Since this is the component most exposed to combustion fumes and condensate during regular use, keeping a replacement on hand means a worn probe doesn't have to hold up a scheduled service.
Order the Anton C03738 Pro Flue Gas Probe online today.
| Brand | Anton |
|---|---|
| Model | C03738 (straight) |
| Compatibility | Anton Sprint Pro 1, 2, 3, 4, 5 and 6 Flue Gas Analysers |
| Shaft Material | Stainless steel |
| Shaft Diameter | 6mm (straight probe) |
| Probe Configuration | Straight |
| Thermocouple | Built-in |
| Insertion Length | 250mm, adjustable depth gauge |
| Hose Length | 2164mm |
| Filtration System | In-line water trap, water block, dust filter, PTFE filter |
| Connection Type | Positive click connector with secondary water block filter |
| Grip Design | Ergonomic, moulded handle |
| Included Components | Flue probe, depth gauge, water trap, dust filter, PTFE filter, hose, positive click connector |
