The Anton Sprint Pro 2 is the Sprint Pro 1 plus a built-in manometer, giving Gas Safe engineers the ability to carry out let-by and tightness pressure tests on a gas installation using the same instrument as flue gas analysis, rather than needing a separate manometer. It measures CO and O₂ directly, and calculates CO₂, CO:CO₂ ratio, excess air and efficiency, with differential pressure measurement across 0–400mbar.
The Pro 2 is "gas escape probe ready" — the analyser has the connection for a gas leak detection probe, but the probe itself is sold separately. It comes included as standard from the Pro 3 upward, so if integrated gas leak detection out of the box matters, the Pro 3 is the next step up.
Double water-stop technology gives two-stage protection against condensate reaching the pump, and the particulate filter is washable rather than disposable. A secure click-in flue probe connector adds further filtration at the connection point. It's BSI independently tested to EN 50379-1:2012 and EN 50379-3:2012, suitable for use with BS 7967 and BS 8494, and is hydrogen blend ready.
USB-C charging covers both the analyser and a compatible printer, and data can be transferred via USB or IR to a PC or compatible Anton printer. It's rated for 14 hours of battery life from its Li-ion rechargeable battery, and — unlike the Pro 1 — can be upgraded to Pro 3 specification or above at a later date if requirements change.
When choosing a combustion analyser, look for: gas measurement capability (O₂, CO and CO₂ as a minimum), BS 7967 compliance if testing for CO in domestic properties, durability for daily field use, data reporting options (printed, digital, or both) and sensor over-range protection. The Sprint Pro 2 covers all of these and adds built-in pressure testing — a genuine time saving over carrying a separate manometer.
Built-in pressure testing removes the need to carry a separate manometer for let-by and tightness tests, which is a genuine time and kit-weight saving for engineers who need both capabilities on every job. Double water-stop technology and a washable particulate filter reduce downtime and consumable cost, and BSI independent testing to EN 50379-1:2012 and EN 50379-3:2012 confirms it meets the standards needed for BS 7967 and BS 8494 work. Being upgradeable to Pro 3 or above also means the investment isn't wasted if requirements grow to include gas leak detection or wireless app connectivity later.
Order the Anton Sprint Pro 2 Multifunction Flue Gas Analyser online today.
| Brand | Anton by Crowcon |
|---|---|
| Product Type | Multifunction Flue Gas Analyser with Pressure Testing |
| Gas Measurements | CO, O₂ (Direct); CO₂, CO:CO₂ Ratio, Excess Air, Efficiency (Calculated) |
| Temperature Measurements | Differential, Flow, Return, Excess Air |
| Differential Pressure | 0–400 mbar |
| K-Type Thermocouple | -50°C to 1000°C |
| Gas Leak Detection | Ready – Probe Sold Separately |
| Standards | EN 50379-1:2012, EN 50379-3:2012 (BSI Tested), BS 7967 |
| Suitable Fuels | Natural Gas, LPG, Oil, Coal, Wood Pellets, Biomass |
| Battery | Li-ion Rechargeable, USB-C, Up to 14 Hours |
| Operating Temperature | -10°C to +50°C |
| Dimensions | 183 x 85 x 50mm |
| Hydrogen Ready | Yes |
| Warranty | 2 Years |
