The Anton Sprint Pro 2 Kit B is built for professional plumbers, oil engineers and commissioning engineers who need combined flue gas analysis, pressure testing and on-site reporting in one setup. It measures CO and O₂ directly, and calculates CO₂, CO:CO₂ ratio, excess air and efficiency — the CO₂ calculation is derived from the O₂ reading rather than measured directly, which is standard for this level of analyser and gives fully acceptable results for BS 7967 testing.
The Pro 2 sits between the Pro 1, which doesn't include pressure testing, and the Pro 3 and above, which add a direct CO₂ sensor and other gas measurements. Built-in let-by and tightness pressure testing means these checks can be carried out without a separate manometer, across a differential pressure range of 0–400mbar with 0.01mbar resolution and ±0.5mbar accuracy.
Kit B builds on Kit A by adding a Pro BS7967 Probe Set, designed specifically for precise, compliant measurements to BS 7967 standards, alongside the infrared magnetic printer, two AS10 pipe clamp temperature probes and the quick drop-in bag — giving a complete commissioning, compliance testing and reporting solution in one package.
Double water-stop technology gives two-stage protection against condensate reaching the sensor pump, and the particulate filter is washable and reusable. It's BSI independently tested to EN 50379-1:2012 and EN 50379-3:2012, suitable for BS 7967 CO sweep testing and ambient air monitoring, and hydrogen blend ready. Like the Pro 2 standalone analyser, this kit can be upgraded to Pro 3 or Pro 5 specification later if requirements change.
Kit B goes a step further than Kit A by including the Pro BS7967 Probe Set alongside the printer and AS10 pipe clamp probes, giving engineers who regularly carry out BS 7967 compliance testing the correct probes for that job without sourcing them separately. Built-in pressure testing removes the need for a separate manometer, and being upgradeable to Pro 3 or Pro 5 specification later means the investment carries forward if requirements grow to include gas leak detection or wireless connectivity.
Order the Anton Sprint Pro 2 Multifunction Flue Gas Analyser Kit B online today.
| Brand | Anton by Crowcon |
|---|---|
| Part Number | PRO2KITB |
| CO Range | 0–4,000 ppm (Electrochemical Sensor) |
| CO₂ | Calculated (0–21%, 0.1% Resolution, ±0.3% Accuracy) |
| Flue Temperature | 5°C – 400°C | 1°C Resolution | ±2°C or 1.5% of Reading |
| K-Type Thermocouple | -50°C to 1000°C | ±2°C or 1.5% of Reading |
| Differential Pressure | 0–400 mbar | 0.01 mbar Resolution | ±0.5 mbar or 1% of Reading |
| Hose Length | 2.146m |
| Standards | EN 50379-1:2012, EN 50379-3:2012 (BSI Independently Tested), BS 7967 |
| Fuel Options | Natural Gas, LPG, Heavy Oil, Light Oil, Coal, Wood, Wood Pellets, Coke, Biomass, Bagasse |
| Battery | Li-ion Rechargeable, USB-C, Up to 14 Hours |
| Operating Temperature | -10°C to +50°C |
| Dimensions (Analyser) | H 183 x W 85 x D 50mm |
| Data Transfer | USB to PC (Sprint Pro PC Software, Windows) / IRDA to Printer |
| Hydrogen Ready | Yes |
| Warranty | 2 Years |
