Splitting or joining small-bore pipework without soldering is often the whole point in a tight space or anywhere a naked flame isn't allowed. The Brass Compression Equal Tee – 10mm connects three equal 10mm copper (or compatible) pipes at 90° using mechanical compression joints, so no heat is needed.
Made from brass and manufactured to BS EN 1254-2, it's WRAS approved and suitable for hot and cold water, heating circuits, compressed air, and low-pressure gas distribution. It's rated to 1 bar at 30°C for gas, 7 bar at 30°C for compressed air, and up to 25 bar (size dependent) for water between 0°C and 95°C, and works with copper, stainless steel, low carbon steel, and select plastic pipe (with inserts).
A flame-free tee means no hot works permit and no fire risk on a job where soldering isn't practical or allowed, and splitting small-bore pipe is often exactly where a compression fitting earns its place. WRAS approval and BS EN 1254-2 compliance make it a fitting you can specify with confidence across water, heating, and low-pressure gas work.
Order the 10mm Brass Compression Equal Tee online today.
| Brand | Hamilton Gas Products Ltd |
|---|---|
| Product Type | Compression Equal Tee |
| Connection | Compression x Compression x Compression |
| Size | 10mm x 10mm x 10mm |
| Material | Brass |
| Finish | Brass |
| Gas Pressure Rating | 1 Bar @ 30°C |
| Compressed Air Rating | 7 Bar @ 30°C |
| Water Pressure Rating | Up to 25 Bar (Size Dependent) @ 0–95°C |
| Pipe Compatibility | Copper, Stainless Steel, Low Carbon Steel, Select Plastics |
| Standard/Approval | BS EN 1254-2, WRAS Approved |
| Suitable Applications | Water, Heating, Compressed Air, and Low-Pressure Gas (Above Ground) |
