Changing direction in pipework without soldering is often the whole point on a retrofit, in a tight space, or anywhere a blowtorch isn't practical. The 10mm Brass Compression Elbow gives a heat-free 90° change of direction in copper or compatible pipework, with a mechanical compression joint that goes together quickly and securely.
Made from brass and manufactured to BS EN 1254-2, this elbow is WRAS approved and suitable for hot and cold water, low-pressure gas, and compressed air systems. It's rated to 1 bar at 30°C for gas, 7 bar at 30°C for compressed air, and up to 25 bar (size dependent) for water between 0°C and 95°C, and works with copper, low carbon steel, stainless steel, and plastic pipe (with appropriate inserts).
A heat-free elbow means no hot works permit and no fire risk on a job where soldering isn't practical or allowed, and a 90° change of direction in 10mm pipe is often exactly where a compression fitting earns its place. WRAS approval and BS EN 1254-2 compliance make it a fitting you can specify with confidence across water, heating, and low-pressure gas work.
Order the 10mm Brass Compression Elbow online today.
| Brand | Hamilton Gas Products Ltd |
|---|---|
| Product Type | Compression Elbow |
| Connection | Compression x Compression |
| Size | 10mm x 10mm |
| Material | Brass |
| Finish | Brass |
| Gas Pressure Rating | 1 bar @ 30°C |
| Compressed Air Rating | 7 bar @ 30°C |
| Water Pressure Rating | 25 bar (8–15mm) @ 0–95°C |
| Pipe Compatibility | Copper, stainless steel, low carbon steel, select plastics |
| Standard/Approval | BS EN 1254-2, WRAS Approved |
| Suitable Applications | Water, heating, oil, and low-pressure gas (above ground) |
