Testo 310 Flue Gas Analyser Printer Kit

Only 2 in Stock
Only 2 left
SKU
T0563 3110
£559.20 £466.00
Or 3 Interest-Free Payments of £186.40
apple pay
klarna
google pay
paypal
FAQs
Calibration
chevron-up
Description

The new Testo 310 - Flue Gas Analyser combines simple functions with a high level of measurement accuracy and is perfect for all basic measurements on heating systems. Long battery lifetimes of up to 10 hours guarantee high availability. Its easy handling and compact design make the testo 310 a robust tool for daily work - even when things get rough.

The printer specially developed for the testo 310, including an infrared interface, allows you to create clear reports on-site as required. The current measurement value can be printed out of any measurement menu during or after the measurement. You present the results of your work to your customer "black on white".

The testo 310 offers all advantages of electronic flue gas measurement in high quality at a perfect cost-benefit ratio. testo 310: Measure. Print. Done. All settings are under control at all times.

The Testo 310 stands out thanks to its easy handling and menu-guided security. You can read the measurement values confidently and conveniently from the well-lit display, even in bad light conditions. The fuels are stored not just as numbers but are each described. At the top edge of the clear display, the symbols for the different measurement menus are always in view. The display and the dirt-insensitive keypad are clearly structured. Operation is very easy - even if you only have one hand free. And you always get right to the point. Thanks to the automatic zeroing of the gas sensor, the testo 310 is ready for use shortly after being switched on - only 30 seconds to start is unbeatably fast.

The testo 310 intentionally concentrates on the four core measurement functions flue gas, ambient CO, draught and pressure. The instrument has two measurement sensors for O2 and CO and a temperature sensor integrated into the flue gas probe. The gas sensors measure the exact oxygen and carbon monoxide content and the flue gas and ambient temperature. From these data, all relevant measurement parameters such as CO2 value, degree of effectivity and flue gas loss are calculated. Since the flue gas probe is permanently fixed to the instrument, there are no single parts in the way.

Delivery Scope

testo 310 - Flue Gas Analyser, Testo IR printer, 2 thermal printer rolls, rechargeable battery, USB mains cable, silicon hose for pressure, 5 x filters, calibration protocol, 180mm probe with cone, spare pressure plugs and hard case.

Specification

Testo 310 Flue Gas Analyser Printer Kit Specification

Technical data

Storage temp. -20.°C to +50,°C
Oper. temp. -5°C to +45°C
Power supply Rech. batt.: 1500 mAh, mains unit 5V / 1A
Memory No memory
Display Backlit 4-line display
Weight (with probe) approx. 700 g
Dimensions 201 x 83 x 44 mm
Warranty Measuring instrument, flue gas probe, gas sensors: 24 months
Thermocouple: 12 months, Rech. batt.: 12 months
Features

Testo 310 Flue Gas Analyser Printer Kit Features

  • Simultaneous measurement of O2, CO, and flue gas and ambient temperatures

  • Printer included

  • Measurement menus for flue gas, draught, CO environment and pressure

  • Sensor zeroing in 30 seconds

  • Rechargeable lithium battery for up to 10 hours of operation

  • Reading printout with a portable printer

testo 310 incl. battery and calibration protocol for the measurement of O2, CO, hPa and °C; IR printer (0554 3100); probe 180 mm with cone; case; mains unit incl. cable; silicon hose for pressure measurement; particle filter 5 off; 2 rolls spare thermal paper for the printer.

Questions
Reviews

Testo 310 Flue Gas Analyser Printer Kit Reviews