Underground gas pipework needs a pipe that won’t corrode and can cope with ground movement. This yellow MDPE gas pipe is polyethylene, so it doesn’t corrode, and MDPE has good resistance to shock and stress cracking and is tolerant of ground movement. The yellow colour identifies it as gas pipe.
It’s 25mm outside diameter PE80 MDPE, SDR 11, supplied in a 50m coil, so runs need fewer joints and the pipe is flexible enough to lay without a lot of fittings. The pipe is made to GIS/PL2-2 and BS EN 1555-2 and is joined with MDPE gas fittings suited to the pipe size and rating.
A coil of MDPE is tightly wound under tension and must be handled with care. Follow the manufacturer’s guidance when uncoiling it, to avoid injury or damage.
Gas work, including jointing and pressure testing, must be carried out by a suitably qualified, registered gas installer in accordance with the relevant standards.
For underground gas pipework, MDPE doesn’t corrode and copes well with ground movement, and the yellow colour tells anyone digging that it’s a gas pipe. A 50m coil means fewer joints on a run, and the pipe is made to the polyethylene gas pipe standards.
Order the 25mm x 50m Yellow MDPE Gas Pipe Coil online today.
| Brand | Radius |
|---|---|
| Product Code | HA9505 |
| Product Type | MDPE Gas Pipe Coil |
| Material | Medium Density Polyethylene (MDPE), PE80 |
| Colour | Yellow |
| Outside Diameter | 25mm |
| SDR | SDR 11 |
| Length | 50 Metres (Coil) |
| Standards | GIS/PL2-2, BS EN 1555-2 |
| Maximum Pressure | 5.5 bar at 0 to 20°C |
| Suitable Applications | Natural Gas and LPG (Installed by a Registered Gas Installer) |
