Sievert Pro 86 Jewellers Gas Blow Torch Kit – Precision Flame That Hits The Mark
A precision torch kit for the serious goldsmith, silversmith & metalworker. The Sievert Pro 86 Jewellers Kit gives you an ultra-fine needle point flame that's capable of reaching 615°C from an 8mm burner – an absolute must for any serious jewellery repair work. It comes with 4m of reinforced hose and a 0.5–4 bar propane regulator as standard. In fact it's completely compatible with Calor & Flo-Gas propane cylinders.
When it comes to precision metalwork you need a flame that hits exactly where you're aiming & doesn't waste energy heating up the surrounding material or damaging a stone setting. The 8mm needle point burner on the Sievert Pro 86 Jewellers Kit delivers just that – an ultra-fine, rock solid flame with a toasty max temperature of 615°C. That's perfect for soldering & annealing gold, silver & lead without the risk of heat damage or having to repeatedly rework what's already been done.
With an output of just 0.25kW and a gas consumption of 20g/h at 2 bar, this isn't some high-power workhorse torch. It's a precision tool, not a brute force solution. The 0.5–4 bar adjustable regulator & single valve on the handle give you precise control over the flame, so you can get a repeatable result every time. The brass components are the same high quality you'd expect from a Pro 86 – and the fact that the neck tube & handle are interchangeable means you can swap the needle point for a wider burner if you need to tackle a bigger job. The 4m three-layer reinforced hose with 0.5–4 bar high pressure regulator also connects directly to Calor Gas & Flo-Gas propane cylinders in any size.
Important: Only for use with propane cylinders. Follow safe working practices at all times when using gas heating equipment & make sure you have good ventilation when using indoors.
The Key Features & Benefits
8mm Needle Point Burner (8842) – The ultra-fine flame is perfect for precise metalwork that needs to be done with surgical care – the kind of work that requires direct heat.
Hit The Mark at 615°C – That means you can reach the high temperatures you need for soldering & annealing gold, silver & lead with precision & control.
Low Power, Low Gas Use (20g/h) – This isn't a massive flame that's just blowing heat all over the place while you're trying to do a job. This is about fine control & economical gas use.
Durable Brass Construction – You know your work is going to get used & abused, so the torch needs to be able to take it. Which is why Sievert use brass components throughout.
Ergonomic Handle – The double-moulded grip on this handle is designed to give you maximum comfort & control during those long sessions of precision metalwork.
Adjust The Flame To Suit – With the single valve you can adjust the flame to get the perfect result without having to put the torch down.
Interchangeable with other Sievert Pro Range – You can swap the needle point for a wider burner if you need to tackle a bigger job – and still get the same quality results.
Extended Hose – 4m of reinforced hose that can take the kind of continuous use that a busy workshop demands.
Full Kit With Regulator Included – The regulator is part of the kit, so you don't need to order it separately. Which saves you time & money.
Wide Cylinder Compatibility – It fits Calor Gas 3.9kg–47kg & Flo-Gas 3.9kg–47kg propane cylinders.
The Ideal Job For
Goldsmithing & silversmithing
All jewellery repair work, including soldering & annealing
When you're working with lead, from restoration to fabrication
Any job that requires precision soldering – like plumbing or soldering small pipes (up to 8mm)
If you're a pro in a workshop, this is the kind of torch you'll need.
What You Get In The Kit
8842 Needle Point Burner – 8mm
3501 Neck Tube – 70mm
3486 Handle with a nice moulded grip for comfort
4m of three-layer reinforced hose
0.5–4 bar high pressure screw-in regulator
Why You Should Buy the Sievert Pro 86
The Needle Point Is What You Need – You won't get a job done with a big wide flame that's taking up all the room. This needle point is designed to give you a precise flame that only goes where you point it.
20g/h Gas Use Is A Game Changer – If you're using this torch in your every day work, then you know how much a difference that is to your running costs.
Using the same burner across multiple projects extends the life of your kit - You can use the Sievert Pro 86 handle & neck tube with any of the burners in your kit - giving you plenty of flexibility when working on different projects now, or in the future. The kit starts with a solid base - then you can add a wider burner for the occasional larger job. The handle & regulator are shared across both burner sizes - no need to buy a whole new set-up for a bit more power.
Proven build quality that withstands heavy use - You can tell Sievert's put a lot of thought into making the Pro 86 kit tough enough to keep going in a busy workshop. The brass components, robust handle & reliable hose all add up to a kit that's built to last - even in the most demanding environments. Where things are used every day, & quality matters way more than some initial saving.
A precision flame, right in your hands, complete kit ready for you to get on with your work. The Sievert Pro 86 Jewellers Gas Blow Torch Kit is in stock & ready to ship out. Order now and have the perfect torch at the ready for your goldsmithing, silversmithing & metalwork needs.
Specification
Sievert Pro 86 Jewellers Gas Blow Torch Kit with Precision Flame Specification
Jewellery making, goldsmithing, silversmithing, lead work, precision soldering
Features
Sievert Pro 86 Jewellers Gas Blow Torch Kit with Precision Flame Features
8mm Needle-Point Burner (8842) — Ultra-fine, stable precision flame — directs heat exactly where required without affecting surrounding material.
Maximum Temperature 615°C — Reaches the temperatures required for soldering and annealing gold, silver and lead with precision and control.
0.25kW Output / 20g/h Gas Consumption — Low output precision tool — economical gas use and fine heat delivery rather than bulk heat output.
Brass Torch Components — Durable, long-lasting brass construction throughout the torch body — the material choice for sustained workshop use.
Ergonomic ABS Comfort Grip Handle (3486) — Double-moulded soft grip for control and comfort during extended precision work sessions.
Single Valve Flame Adjustment — Precise, repeatable flame control at the handle — adjust without interrupting the work.
Interchangeable with Sievert PRO Range — The needle-point burner swaps with other Pro 86 burners — the same kit handles jewellery work and wider metalwork applications.
4m Three-Layer Reinforced Hose — Substantial reach between cylinder and torch with a durable hose construction for workshop use.
0.5–4 Bar High Pressure Propane Regulator — Full kit with regulator included — ready to connect to a propane cylinder and start work.
Wide Cylinder Compatibility — Fits Calor Gas 3.9kg–47kg and Flo-Gas 3.9kg–47kg propane cylinders.
Questions
Reviews
Sievert Pro 86 Jewellers Gas Blow Torch Kit with Precision Flame Reviews
