Pegler VSH Xpress Water Slip Coupling - 42mm
You might also like:
A slip coupling lets you repair a pipe that can’t be moved apart. The Pegler Yorkshire VSH XPress S1S is a copper slip coupling with press ends on both sides and no tube stop, so it can slide fully over the tube, for jointing 42mm copper tube without a flame. It’s 120mm long.
It’s BSI Kitemark approved to BS 8537:2010 and WRAS approved, and Pegler lists DVGW approval as well. It’s for hot and cold water services, vented and unvented closed circuit heating and chilled water, and rated to 16 bar across a temperature range of -24°C to 110°C. The Leak Before Press feature means an unpressed fitting shows up during pressure testing. It’s M-profile jaw compatible, for use with half-hard and hard copper tube to BS EN 1057 R250 and R290, and it carries Pegler’s 25-year manufacturer’s guarantee (conditions apply).
Because there’s no tube stop, follow Pegler’s installation instructions for insertion depth. The joint needs no flame, though site rules still apply. This fitting is for water and heating, and isn’t for gas: Pegler has a separate XPress Gas range.
For repairing a 42mm copper pipe that can’t be moved apart, a slip coupling slides over the tube and presses on without a flame. This one is Kitemarked and WRAS approved, with Leak Before Press.
Order the Pegler Yorkshire VSH XPress 42mm Water Slip Coupling online today.
| Brand | Pegler Yorkshire |
|---|---|
| Product Code | 38048 (S1S) |
| Product Type | XPress Slip Coupling |
| Size | 42mm x 42mm |
| Ends | Press x Press, Without Tube Stop |
| Material | Copper |
| Approvals | BSI Kitemark (BS 8537:2010); WRAS; DVGW |
| For Use With | BS EN 1057 R250 / R290 Copper Tube |
| Connection | Press (M Profile) |
| Maximum Pressure | 16 bar |
| Temperature Range | -24°C to 110°C at 16 bar |
| Length | 120mm |
| Guarantee | 25 Years (Conditions Apply) |
| Suitable Applications | Hot and Cold Water, Vented and Unvented Closed Circuit Heating, Chilled Water |
| Not Suitable For | Gas (Use XPress Gas Range) |