Pegler VSH XPress 28mm Water 45° Elbow
You might also like:
A 45° elbow lets you change direction gently without a flame. The Pegler Yorkshire VSH XPress S21 is a copper 45° (obtuse) elbow with press ends on both sides, for jointing 28mm copper tube. A standard elbow turns the pipe by 90°, and this one turns it by 45°.
It’s BSI Kitemark approved to BS 8537:2010 and WRAS approved, and KIWA approval is listed as well. It’s for hot and cold water services, vented and unvented closed circuit heating and chilled water, and rated to 16 bar across a temperature range of -24°C to 110°C. The Leak Before Press feature means an unpressed fitting shows up during pressure testing. It’s M-profile jaw compatible, for use with half-hard and hard copper tube to BS EN 1057 R250 and R290, and it carries Pegler’s 25-year manufacturer’s guarantee (conditions apply).
The joint needs no flame, though site rules still apply. This fitting is for water and heating, and isn’t for gas: Pegler has a separate XPress Gas range.
For a gentle change of direction in 28mm copper without a flame, this Kitemarked, WRAS-approved 45° elbow is made for the job. Leak Before Press shows unpressed fittings when you test.
Order the Pegler Yorkshire VSH XPress 28mm Water Obtuse Elbow online today.
| Brand | Pegler Yorkshire |
|---|---|
| Product Code | 38414 (S21) |
| Product Type | XPress 45° Obtuse Elbow (Equal) |
| Size | 28mm x 28mm |
| Material | Copper |
| Approvals | BSI Kitemark (BS 8537:2010); WRAS; KIWA |
| For Use With | BS EN 1057 R250 / R290 Copper Tube |
| Connection | Press (M Profile) |
| Maximum Pressure | 16 bar |
| Temperature Range | -24°C to 110°C at 16 bar |
| Guarantee | 25 Years (Conditions Apply) |
| Suitable Applications | Hot and Cold Water, Vented and Unvented Closed Circuit Heating, Chilled Water |
| Not Suitable For | Gas (Use XPress Gas Range) |