Pegler VSH Xpress Water 90° Copper Bend - 28mm
You might also like:
The Pegler Yorkshire VSH XPress Water 90° Copper Bend is a formed copper bend with two plain 28mm tube ends. It changes direction by 90° on 28mm copper pipework and is used with VSH XPress press fittings.
It is approved by WRAS and KIWA, with a working pressure of 16 bar from -20°C to 110°C. It is made for hot and cold water services, vented and unvented closed circuit heating and chilled water systems in domestic and commercial buildings. The body is copper, with the material and size marked clearly on the fitting.
For water systems only. Do not use this fitting on gas. Have the installation carried out by a competent installer, and pressure test the system before use.
This formed copper bend turns 28mm pipework through 90° in a single piece, with two plain tube ends for use with VSH XPress fittings. It is approved by WRAS and KIWA and rated to 16 bar from -20°C to 110°C.
Order the Pegler VSH Xpress Water 90° Copper Bend - 28mm online today.
| Brand | Pegler Yorkshire Xpress |
|---|---|
| Approvals | WRAS & KIWA |
| Connection Type | Tube End x Tube End |
| Suitable For | Water |
| Max. Operating Pressure | 16 bar |
| Working Pressure Range | 16 bar at -20°C to 110°C |
| Equal/Reducing | Equal |
| Fitting Type | 90° Copper Bend |
| Material | Copper |
| Size | 28mm |
| Bend Radius | 34 mm |
| Leg Lengths | 80 mm and 120 mm |
| Dimensions | 29 x 95 x 135 mm |
| Weight | 0.19 kg |
| Application | Hot and cold water services, vented and unvented closed circuit heating and chilled water applications |