Pegler VSH Xpress Water Fitting Reducer - 42 x 28mm

In stock
Only 1 left
SKU
38211
£9.36 £7.80
Or 3 Interest-Free Payments of £3.12
apple pay
klarna
google pay
paypal
chevron-up
Description

Pegler Yorkshire VSH XPress 42 x 28mm Water Reducer (38211)

A reducer steps a 42mm run down to 28mm, and a press-fit one does it without a flame. The Pegler Yorkshire VSH XPress S6 is a copper reducer with a 28mm press end on one side and a plain 42mm male end on the other. The 42mm male end pushes into another XPress fitting, and the 28mm end is pressed onto 28mm copper tube.

It’s BSI Kitemark approved to BS 8537:2010 and WRAS approved. It’s for hot and cold water services, vented and unvented closed circuit heating and chilled water, and rated to 16 bar across a temperature range of -24°C to 110°C. The Leak Before Press feature means an unpressed fitting shows up during pressure testing. The press end is M-profile jaw compatible, for use with half-hard and hard copper tube to BS EN 1057 R250 and R290, and it carries Pegler’s 25-year manufacturer’s guarantee (conditions apply).

The joint needs no flame, though site rules still apply. This fitting is for water and heating, and isn’t for gas: Pegler has a separate XPress Gas range. Note that it has one press end and one male end, so check you need this type of reducer and not one with two press ends.

Key Features & Benefits
  • 42mm Male x 28mm Press: The 42mm male end inserts into another XPress fitting.
  • Heat-Free Press-Fit: No flame is needed to make the joint.
  • BSI Kitemark (BS 8537:2010) and WRAS Approved: For potable water use.
  • Leak Before Press: Unpressed fittings are identified during pressure testing.
  • 16 Bar, -24°C to 110°C: Pressure rating across the temperature range.
  • M-Profile Jaw Compatible: For use with R250 and R290 copper tube.
  • 25-Year Manufacturer's Guarantee: Conditions apply.
Ideal For
  • Stepping down from 42mm to 28mm directly at an XPress fitting, such as a tee.
  • Hot and cold water services and closed circuit heating.
  • Installers who want a heat-free jointing method.
Why Buy This Product?

For stepping a 42mm run down to 28mm without a flame, this Kitemarked, WRAS-approved press-fit reducer goes straight into the next fitting. Leak Before Press shows unpressed fittings when you test.

Order the Pegler Yorkshire VSH XPress 42 x 22mm Water Reducer online today.

Specification

Pegler VSH Xpress Water Fitting Reducer - 42 x 28mm Specification

Brand Pegler Yorkshire
Product Code 38211 (S6)
Product Type XPress Reducer (Male x Press)
Size 42mm x 28mm
Ends 42mm Male (Plain Spigot) x 28mm Press
Material Copper
Approvals BSI Kitemark (BS 8537:2010); WRAS
For Use With BS EN 1057 R250 / R290 Copper Tube
Connection Press (M Profile)
Maximum Pressure 16 bar
Temperature Range -24°C to 110°C at 16 bar
Guarantee 25 Years (Conditions Apply)
Suitable Applications Hot and Cold Water, Vented and Unvented Closed Circuit Heating, Chilled Water
Not Suitable For Gas (Use XPress Gas Range)
Features

Pegler VSH Xpress Water Fitting Reducer - 42 x 28mm Features

  • 42mm Male x 28mm Press: The 42mm male end inserts into another XPress fitting.
  • Heat-Free Press-Fit: No flame is needed to make the joint.
  • BSI Kitemark (BS 8537:2010) and WRAS Approved: For potable water use.
  • Leak Before Press: Unpressed fittings are identified during pressure testing.
  • 16 Bar, -24°C to 110°C: Pressure rating across the temperature range.
  • M-Profile Jaw Compatible: For use with R250 and R290 copper tube.
  • 25-Year Manufacturer's Guarantee: Conditions apply.
Questions
Reviews

Pegler VSH Xpress Water Fitting Reducer - 42 x 28mm Reviews