Pegler VSH Xpress Gas Slip Coupling - 28mm

In stock
Only 3 left
SKU
39712
£11.12 £9.27
Or 3 Interest-Free Payments of £3.71
apple pay
klarna
google pay
paypal
chevron-up
Description

Pegler Yorkshire VSH XPress 28mm Gas Slip Coupling (39712)

Gas pipework needs a fitting made for gas, and a slip coupling lets you repair a pipe that can’t be moved apart. The Pegler Yorkshire VSH XPress Gas Slip Coupling is an SG1 slip copper coupling with press ends on both sides and no tube stop, so it can slide fully over the tube. It’s for 28mm copper tube on internal and external above-ground 2nd and 3rd family gas installation pipework, which means natural gas and LPG. It’s 90mm long.

It’s BSI Kitemark approved to BS 8537:2010. A yellow HNBR O-ring and a permanent yellow gas marking identify it as a gas fitting. It’s for use with BS EN 1057 R250 and R290 copper tube with M-profile jaws, and it carries Pegler’s 25-year guarantee when used with copper tube to BS EN 1057 (conditions apply).

Pegler gives the working pressure as 1 bar inside buildings and 5 bar outside buildings (maximum test pressure 7.5 bar), at -20°C to 70°C. Because there’s no tube stop, follow Pegler’s installation instructions for insertion depth, and check that every joint is pressed and tested as part of your installation process. Don’t use the water-range XPress fittings on gas. Gas work must be carried out by a suitably qualified, registered gas installer in accordance with the relevant standards.

Key Features & Benefits
  • Slip Pattern, No Tube Stop: Slides fully over the tube, for repairs.
  • Heat-Free Press-Fit: No naked flame is needed to make the joint.
  • BSI Kitemark (BS 8537:2010): For XPress copper and gas fittings.
  • Yellow O-Ring and Gas Marking: Easy to tell from water fittings.
  • Working Pressure: 1 bar inside buildings, 5 bar outside (maximum test pressure 7.5 bar).
  • -20°C to 70°C: Approved temperature range.
  • 2nd and 3rd Family Gases: Natural gas and LPG, above ground.
  • 25-Year Guarantee: With copper tube to BS EN 1057, conditions apply.
Ideal For
  • Repairing 28mm copper gas pipework where the ends can't be moved apart.
  • Domestic and commercial above-ground gas pipework in copper tube.
  • Registered gas installers who want a heat-free joint.
Why Buy This Product?

For repairing 28mm copper gas pipework that can’t be moved apart, a slip coupling slides over the tube and presses on without a flame. This one is Kitemarked, marked yellow for gas and rated to 1 bar inside and 5 bar outside buildings.

Order the Pegler Yorkshire VSH XPress 28mm Gas Slip Coupling online today.

Specification

Pegler VSH Xpress Gas Slip Coupling - 28mm Specification

Brand Pegler Yorkshire
Product Code 39712 (SG1 Slip)
Product Type XPress Gas Slip Coupling
Size 28mm x 28mm
Ends Press x Press, Without Tube Stop
Material Copper
Approvals BSI Kitemark (BS 8537:2010)
For Use With BS EN 1057 R250 / R290 Copper Tube
Connection Press (M Profile)
Working Pressure 1 bar Inside Buildings; 5 bar Outside Buildings
Maximum Test Pressure 7.5 bar
Temperature Range -20°C to 70°C
O-Ring Yellow HNBR
Length 90mm
Guarantee 25 Years With BS EN 1057 Copper Tube (Conditions Apply)
Suitable Applications Above-Ground 2nd and 3rd Family Gas (Natural Gas and LPG), Installed by a Registered Gas Installer
Features

Pegler VSH Xpress Gas Slip Coupling - 28mm Features

  • Slip Pattern, No Tube Stop: Slides fully over the tube, for repairs.
  • Heat-Free Press-Fit: No naked flame is needed to make the joint.
  • BSI Kitemark (BS 8537:2010): For XPress copper and gas fittings.
  • Yellow O-Ring and Gas Marking: Easy to tell from water fittings.
  • Working Pressure: 1 bar inside buildings, 5 bar outside (maximum test pressure 7.5 bar).
  • -20°C to 70°C: Approved temperature range.
  • 2nd and 3rd Family Gases: Natural gas and LPG, above ground.
  • 25-Year Guarantee: With copper tube to BS EN 1057, conditions apply.
Questions
Reviews

Pegler VSH Xpress Gas Slip Coupling - 28mm Reviews