Pegler VSH Xpress Gas Female Coupling - 28mm x 1" BSP FM
You might also like:
Gas pipework often has to end at a threaded part, and the fitting has to be made for gas. The Pegler Yorkshire VSH XPress Gas Female Connector is an SG2 fitting with a 28mm press end on one side and a 1" BSP parallel female thread (Rp 1") on the other, for connecting 28mm copper tube to a threaded part on internal and external above-ground 2nd and 3rd family gas installation pipework, which means natural gas and LPG.
It’s BSI Kitemark approved to BS 8537:2010, with DVGW, INIG, KIWA and OVGW approvals listed by Pegler. A yellow HNBR O-ring and a permanent yellow gas marking identify it as a gas fitting. The press end is for use with BS EN 1057 R250 and R290 copper tube with M-profile jaws, and it carries Pegler’s 25-year guarantee when used with copper tube to BS EN 1057 (conditions apply).
Pegler gives the working pressure as 1 bar inside buildings and 5 bar outside buildings (maximum test pressure 7.5 bar), at -20°C to 70°C. The thread is a parallel female thread, so check the mating thread, and use a thread sealant approved for gas, following the manufacturer’s instructions. Check that every joint is pressed and tested as part of your installation process. Don’t use the water-range XPress fittings on gas. Gas work must be carried out by a suitably qualified, registered gas installer in accordance with the relevant standards.
For ending 28mm copper gas pipework at a 1" threaded part, you want a fitting made for gas and a press joint without flame. This connector is Kitemarked, marked yellow for gas and rated to 1 bar inside and 5 bar outside buildings.
Order the Pegler Yorkshire VSH XPress 28mm x 1" Gas Female Connector online today.
| Brand | Pegler Yorkshire |
|---|---|
| Product Code | 39724 (SG2) |
| Product Type | XPress Gas Straight Female Connector |
| Size | 28mm Press x 1" BSP Parallel Female |
| Material | Copper Alloy |
| Approvals | BSI Kitemark (BS 8537:2010); DVGW, INIG, KIWA, OVGW |
| For Use With | BS EN 1057 R250 / R290 Copper Tube |
| Connection | Press (M Profile) x BSP Parallel Female Thread |
| Working Pressure | 1 bar Inside Buildings; 5 bar Outside Buildings |
| Maximum Test Pressure | 7.5 bar |
| Temperature Range | -20°C to 70°C |
| O-Ring | Yellow HNBR |
| Guarantee | 25 Years With BS EN 1057 Copper Tube (Conditions Apply) |
| Suitable Applications | Above-Ground 2nd and 3rd Family Gas (Natural Gas and LPG), Installed by a Registered Gas Installer |