Pegler VSH Xpress Gas Fitting Reducer - 35 x 28mm

In stock
SKU
39754
£10.74 £8.95
Or 3 Interest-Free Payments of £3.58
apple pay
klarna
google pay
paypal
chevron-up
Description

Pegler Yorkshire VSH XPress 35 x 28mm Gas Reducer (39754)

Gas pipework needs a fitting made for gas, and a press-fit one avoids a flame in the joint. The Pegler Yorkshire VSH XPress Gas Reducer is an SG6 copper reducer with a 28mm press end on one side and a plain 35mm male end on the other. The 35mm male end pushes into another XPress gas fitting, and the 28mm end is pressed onto 28mm copper tube. It’s for internal and external above-ground 2nd and 3rd family gas installation pipework, which means natural gas and LPG.

It’s BSI Kitemark approved to BS 8537:2010. A yellow HNBR O-ring and a permanent yellow gas marking identify it as a gas fitting. The press end is for use with BS EN 1057 R250 and R290 copper tube with M-profile jaws, and it carries Pegler’s 25-year guarantee when used with copper tube to BS EN 1057 (conditions apply).

Pegler gives the working pressure as 1 bar inside buildings and 5 bar outside buildings (maximum test pressure 7.5 bar), at -20°C to 70°C. Check that every joint is pressed and tested as part of your installation process. Don’t use the water-range XPress fittings on gas. Note that it has one press end and one male end, so check you need this type of reducer and not one with two press ends. Gas work must be carried out by a suitably qualified, registered gas installer in accordance with the relevant standards.

Key Features & Benefits
  • 35mm Male x 28mm Press: The 35mm male end inserts into another XPress gas fitting.
  • Heat-Free Press-Fit: No naked flame is needed to make the joint.
  • BSI Kitemark (BS 8537:2010): For XPress copper and gas fittings.
  • Yellow O-Ring and Gas Marking: Easy to tell from water fittings.
  • Working Pressure: 1 bar inside buildings, 5 bar outside (maximum test pressure 7.5 bar).
  • -20°C to 70°C: Approved temperature range.
  • 2nd and 3rd Family Gases: Natural gas and LPG, above ground.
  • 25-Year Guarantee: With copper tube to BS EN 1057, conditions apply.
Ideal For
  • Stepping down from 35mm to 28mm directly at an XPress gas fitting, such as a tee.
  • Domestic and commercial above-ground gas pipework in copper tube.
  • Registered gas installers who want a heat-free joint.
Why Buy This Product?

For stepping a 35mm gas run down to 28mm without a flame, this Kitemarked reducer goes straight into the next XPress gas fitting. It’s marked yellow for gas and rated to 1 bar inside and 5 bar outside buildings.

Order the Pegler Yorkshire VSH XPress 35 x 28mm Gas Reducer online today.

Specification

Pegler VSH Xpress Gas Fitting Reducer - 35 x 28mm Specification

Brand Pegler Yorkshire
Product Code 39754 (SG6)
Product Type XPress Gas Reducer (Male x Press)
Size 35mm x 28mm
Ends 35mm Male (Plain Spigot) x 28mm Press
Material Copper
Approvals BSI Kitemark (BS 8537:2010)
For Use With BS EN 1057 R250 / R290 Copper Tube
Connection Press (M Profile)
Working Pressure 1 bar Inside Buildings; 5 bar Outside Buildings
Maximum Test Pressure 7.5 bar
Temperature Range -20°C to 70°C
O-Ring Yellow HNBR
Guarantee 25 Years With BS EN 1057 Copper Tube (Conditions Apply)
Suitable Applications Above-Ground 2nd and 3rd Family Gas (Natural Gas and LPG), Installed by a Registered Gas Installer
Features

Pegler VSH Xpress Gas Fitting Reducer - 35 x 28mm Features

  • 35mm Male x 28mm Press: The 35mm male end inserts into another XPress gas fitting.
  • Heat-Free Press-Fit: No naked flame is needed to make the joint.
  • BSI Kitemark (BS 8537:2010): For XPress copper and gas fittings.
  • Yellow O-Ring and Gas Marking: Easy to tell from water fittings.
  • Working Pressure: 1 bar inside buildings, 5 bar outside (maximum test pressure 7.5 bar).
  • -20°C to 70°C: Approved temperature range.
  • 2nd and 3rd Family Gases: Natural gas and LPG, above ground.
  • 25-Year Guarantee: With copper tube to BS EN 1057, conditions apply.
Questions
Reviews

Pegler VSH Xpress Gas Fitting Reducer - 35 x 28mm Reviews