Pegler VSH Xpress Gas Equal Tee - 35mm
You might also like:
Gas pipework needs a fitting made for gas, and a press-fit one avoids a flame in the joint. The Pegler VSH XPress Gas Equal Tee is an SG24 copper press-fit tee with three 35mm press ends, for branching 35mm copper tube on internal and external above-ground 2nd and 3rd family gas installation pipework, which means natural gas and LPG.
It’s BSI Kitemark approved to BS 8537:2010. A yellow HNBR O-ring and a permanent yellow gas marking identify it as a gas fitting. It’s for use with BS EN 1057 R250 and R290 copper tube with M-profile jaws, and it carries Pegler’s 25-year guarantee when used with copper tube to BS EN 1057 (conditions apply).
Pegler gives the working pressure as 1 bar inside buildings and 5 bar outside buildings (maximum test pressure 7.5 bar), at -20°C to 70°C. Check that every joint is pressed and tested as part of your installation process. Don’t use the water-range XPress fittings on gas. Gas work must be carried out by a suitably qualified, registered gas installer in accordance with the relevant standards.
For branching a gas run in 35mm copper, you want a fitting made for gas and a joint without flame. This tee is Kitemarked, marked yellow for gas and rated to 1 bar inside and 5 bar outside buildings.
Order the Pegler VSH XPress 35mm Gas Equal Tee online today.
| Brand | Pegler Yorkshire |
|---|---|
| Product Code | 39853 (SG24) |
| Product Type | XPress Gas Equal Tee |
| Size | 35mm x 35mm x 35mm |
| Material | Copper |
| Approvals | BSI Kitemark (BS 8537:2010) |
| For Use With | BS EN 1057 R250 / R290 Copper Tube |
| Connection | Press, M Profile |
| Working Pressure | 1 bar Inside Buildings; 5 bar Outside Buildings |
| Maximum Test Pressure | 7.5 bar |
| Temperature Range | -20°C to 70°C |
| O-Ring | Yellow HNBR |
| Guarantee | 25 Years With BS EN 1057 Copper Tube (Conditions Apply) |
| Suitable Applications | Above-Ground 2nd and 3rd Family Gas (Natural Gas and LPG), Installed by a Registered Gas Installer |