Gas pipework needs a fitting made for gas, and a street elbow lets you turn a corner straight into another fitting. The Pegler Yorkshire VSH XPress Gas Street Elbow is an SG12S copper 90° elbow with a press end on one side and a plain male end on the other, for pushing into another XPress fitting. It’s for 35mm copper tube on internal and external above-ground 2nd and 3rd family gas installation pipework, which means natural gas and LPG.
It’s BSI Kitemark approved to BS 8537:2010, with DVGW, INIG, KIWA and OVGW approvals listed by Pegler for this size. A yellow HNBR O-ring and a permanent yellow gas marking identify it as a gas fitting. The press end is for use with BS EN 1057 R250 and R290 copper tube with M-profile jaws, and it carries Pegler’s 25-year guarantee when used with copper tube to BS EN 1057 (conditions apply).
Pegler gives the working pressure as 1 bar inside buildings and 5 bar outside buildings (maximum test pressure 7.5 bar), at -20°C to 70°C. Check that every joint is pressed and tested as part of your installation process. Don’t use the water-range XPress fittings on gas. Note that it has one press end and one male end, so check you need a street elbow and not a standard elbow with two press ends. Gas work must be carried out by a suitably qualified, registered gas installer in accordance with the relevant standards.
When you need a 90° turn straight into another XPress gas fitting, a street elbow saves a joint. This one is Kitemarked, marked yellow for gas and rated to 1 bar inside and 5 bar outside buildings.
Order the Pegler Yorkshire VSH XPress 35mm Gas 90° Street Elbow online today.
| Brand | Pegler Yorkshire |
|---|---|
| Product Code | 39793 (SG12S) |
| Product Type | XPress Gas 90° Street Elbow |
| Size | 35mm |
| Ends | Press x Male (Plain Spigot) |
| Material | Copper |
| Approvals | BSI Kitemark (BS 8537:2010); DVGW, INIG, KIWA, OVGW |
| For Use With | BS EN 1057 R250 / R290 Copper Tube |
| Connection | Press (M Profile) |
| Working Pressure | 1 bar Inside Buildings; 5 bar Outside Buildings |
| Maximum Test Pressure | 7.5 bar |
| Temperature Range | -20°C to 70°C |
| O-Ring | Yellow HNBR |
| Guarantee | 25 Years With BS EN 1057 Copper Tube (Conditions Apply) |
| Suitable Applications | Above-Ground 2nd and 3rd Family Gas (Natural Gas and LPG), Installed by a Registered Gas Installer |
