The Anton Sprint Pro 3 is the step up from the Pro 2, adding a built-in gas leak detection probe and wireless Bluetooth connectivity to the Anton Sprint Pro mobile app (iOS and Android). It measures CO and O₂ directly, and calculates CO₂, CO:CO₂ ratio, excess air and efficiency, with let-by and tightness pressure testing built in and BS 7967 CO sweep capability.
Two things separate the Pro 3 from the Pro 2. First, the gas leak detector probe — with a flexible swan neck and LED torch — is included as standard, so a separate combustible gas detector isn't needed for the leak-checking part of a service. Second, Bluetooth connectivity to the Anton Sprint Pro app allows readings to be viewed and logged remotely on a phone or tablet, with reports sent wirelessly rather than needing to transfer data via USB after a test.
As with the Pro 2, CO₂ is calculated rather than measured directly, which is standard at this level and fully adequate for BS 7967 testing. The printer isn't included with the Pro 3 basic kit — reports can either be printed via a separately purchased printer or generated and shared directly from the app.
Double water-stop technology gives dual condensate protection to prevent moisture reaching the pump and sensor, and the particulate filter is washable. It's BSI independently tested to EN 50379-1:2012 and EN 50379-3:2012, hydrogen blend ready, and can be upgraded to Pro 4, Pro 5 or Pro 6 specification at a later date if requirements change.
Having the gas leak detection probe included removes the need to carry and manage a separate combustible gas detector alongside the flue gas analyser, and Bluetooth connectivity to the Anton Sprint Pro app means readings and reports can be handled entirely from a phone or tablet, without a USB transfer step at the end of a job. Being upgradeable to Pro 4, Pro 5 or Pro 6 later also protects the investment if requirements expand to include ambient CO₂ sensing or additional gas measurements.
Order the Anton Sprint Pro 3 Multifunction Flue Gas Analyser online today.
| Brand | Anton by Crowcon |
|---|---|
| Part Number | PRO3KITA |
| CO | Electrochemical Sensor – Direct Measurement |
| CO₂ | Calculated (0–21%, 0.1% Resolution, ±0.3% Accuracy) |
| Flue Temperature | 5°C – 400°C | 1°C Resolution | ±2°C or 1.5% of Reading |
| K-Type Thermocouple | -50°C to 1000°C | ±2°C or 1.5% of Reading |
| Differential Pressure | 0–400 mbar | 0.01 mbar Resolution | ±0.5 mbar or 1% |
| Gas Leak Detection | Yes – Included Gas Escape Probe (Swan Neck, LED Torch) |
| Wireless Connectivity | Bluetooth – Anton Sprint Pro App (iOS and Android) |
| Printer | Not Included – Available Separately |
| Hose Length | 2.146m |
| Standards | EN 50379-1:2012, EN 50379-3:2012 (BSI Tested), BS 7967 |
| Fuel Options | Natural Gas, LPG, Heavy Oil, Light Oil, Coal, Wood, Wood Pellets, Coke, Biomass, Bagasse |
| Battery | Li-ion Rechargeable, USB-C, Up to 14 Hours |
| Operating Temperature | -10°C to +50°C |
| Dimensions (Analyser) | H 183 x W 85 x D 50mm |
| Hydrogen Ready | Yes |
| Warranty | 2 Years |
