The Anton Sprint Pro 3 Kit B includes everything in Kit A, plus the Pro BS7967 Probe Set for flueless appliances — making it the complete kit for engineers who service flueless gas fires, decorative fuel effect (DFE) appliances and other flueless installations covered by BS 7967, alongside standard flued boilers and gas fires.
BS 7967 sets specific requirements for testing carbon monoxide emissions from domestic heating appliances without a traditional chimney, including DFE appliances and other flueless heating appliances. This type of testing requires a different probe set and measurement procedure than the standard flue probe supplied with the Sprint Pro analyser. Kit B provides that additional probe set, so engineers who service flueless-type appliances have everything needed for full compliance in one kit. If flueless appliances aren't part of the work, Kit A is the more appropriate option.
The Pro 3 itself measures CO and O₂ directly, with CO₂ calculated from the O₂ reading, and includes let-by and tightness pressure testing using the included APRV. The integrated gas escape probe, with swan neck and LED torch, gives gas leak detection in the same instrument, and Bluetooth connects to the Anton Sprint Pro app for live readings and wireless report sharing. The infrared magnetic printer allows reports to be printed on site.
Double water-stop technology gives dual condensate protection, and it's BSI independently tested to EN 50379-1:2012 and EN 50379-3:2012, hydrogen blend ready, and can be upgraded to Pro 4, Pro 5 or Pro 6 specification later if requirements change.
The BS7967 probe set is the deciding factor for choosing Kit B over Kit A — without it, testing flueless gas fires and DFE appliances to BS 7967 isn't possible with the standard flue probe alone. For engineers who cover both flued and flueless work, having the correct probe set in the same kit as the printer, gas leak detection and pressure testing means one purchase covers the full range of appliance types encountered on a typical service round.
Order the Anton Sprint Pro 3 Multifunction Flue Gas Analyser Kit B online today.
| Brand | Anton by Crowcon |
|---|---|
| Part Number | PRO3KITB |
| CO | Electrochemical Sensor – Direct Measurement |
| CO₂ | Calculated (0–21%, 0.1% Resolution, ±0.3% Accuracy) |
| Flue Temperature | 5°C – 400°C | 1°C Resolution | ±2°C or 1.5% of Reading |
| K-Type Thermocouple | -50°C to 1000°C | ±2°C or 1.5% of Reading |
| Differential Pressure | 0–400 mbar | 0.01 mbar | ±0.5 mbar or 1% |
| Gas Leak Detection | Yes – Gas Escape Probe with Swan Neck and LED Torch |
| BS7967 Probe Set | Included – For Flueless Appliance CO Assessment |
| Wireless Connectivity | Bluetooth – Anton Sprint Pro App (iOS and Android) |
| Printer | Infrared Magnetic Printer – Included |
| Standards | EN 50379-1:2012, EN 50379-3:2012 (BSI Tested), BS 7967 |
| Fuel Options | Natural Gas, LPG, Heavy Oil, Light Oil, Coal, Wood, Wood Pellets, Coke, Biomass, Bagasse |
| Battery | Li-ion Rechargeable, USB-C, Up to 14 Hours |
| Operating Temperature | -10°C to +50°C |
| Dimensions (Analyser) | H 183 x W 85 x D 50mm |
| Hydrogen Ready | Yes |
| Warranty | 2 Years |
