Underground gas pipework needs a pipe that won’t corrode and can cope with ground movement. This yellow MDPE gas pipe is polyethylene, so it doesn’t corrode, and MDPE has good resistance to shock and stress cracking and is tolerant of ground movement. The yellow colour identifies it as gas pipe.
It’s 20mm outside diameter PE80 MDPE, SDR 11, supplied in a 100m coil, so long runs need fewer joints and the pipe is flexible enough to lay without a lot of fittings.
A coil of MDPE is tightly wound under tension and must be handled with care. Follow the manufacturer’s guidance when uncoiling it, to avoid injury or damage.
Gas work, including jointing and pressure testing, must be carried out by a suitably qualified, registered gas installer in accordance with the relevant standards.
For underground gas pipework, MDPE doesn’t corrode and copes well with ground movement, and the yellow colour tells anyone digging that it’s a gas pipe. A 100m coil means fewer joints on a long run, and the pipe is made to the polyethylene gas pipe standards.
Order the 20mm x 100m Yellow MDPE Gas Pipe Coil online today.
| Brand | Radius |
|---|---|
| Product Code | HA2530 |
| Product Type | MDPE Gas Pipe Coil |
| Material | Medium Density Polyethylene (MDPE), PE80 |
| Outside Diameter | 20mm |
| SDR | SDR 11 |
| Colour | Yellow |
| Outside Diameter | 20mm |
| Length | 100 Metres (Coil) |
| Standards | GIS/PL2-2, BS EN 1555-2 |
| Maximum Pressure | 5.5 bar at 0 to 20°C |
| Suitable Applications | Natural Gas and LPG (Installed by a Registered Gas Installer) |
