Wallplate Elbow - 15mm Compression x 1/2" BSP Female
Mounting a tap, valve, or appliance connection to a wall calls for a fitting that provides both a secure pipe connection and a fixed mounting point, and a wallplate elbow does both. This 15mm compression x ½" BSP parallel female wallplate elbow gives a 90° change of direction with integral mounting holes, letting it be fixed rigidly to a surface rather than relying on the pipe alone to hold position.
Made from brass and manufactured to BS EN 1254-2, it's WRAS approved and suitable for use with copper tube to BS EN 1057. The compression joint uses an olive seal that grips the copper pipe mechanically, so there's no soldering or naked flame required — useful for repair and maintenance work in damp conditions or anywhere heat isn't practical. Where used on natural gas or LPG, EN 1254-2 fittings are limited to a maximum operating pressure of 5 bar in accordance with EN 1775.
Key Features & Benefits
15mm Compression x ½" BSP Parallel Female: Connects copper pipe to a threaded outlet.
90° Wallplate Design: Integral mounting holes allow the fitting to be secured to a surface.
Brass Body: Durable and corrosion resistant.
Olive-Based Compression Seal: Grips copper pipe mechanically for a watertight connection.
Heat-Free Installation: No soldering or naked flame required.
WRAS Approved, BS EN 1254-2: Suitable for potable water and low-pressure gas up to 5 bar (per EN 1775).
Ideal For
Hot and cold water installations (above ground).
Mounting taps, valves, and appliance connections to a wall.
Outside taps and garden tap installations.
Central heating system work.
Low-pressure gas pipework in copper tube, up to 5 bar (above ground).
Why Buy This Product?
A tap or valve connection that's only held in place by the pipe behind it will work loose over time, and the wallplate mounting holes on this elbow solve that by fixing the connection point rigidly to the wall. Being heat-free also means it goes in without a torch, which matters on a repair job in a confined or damp space where soldering isn't a practical option.
Order the Wallplate Elbow - 15mm Compression x 1/2" BSP Female online today.
Specification
Wallplate Elbow - 15mm Compression x 1/2" BSP Female Specification
Brand
Hamilton Gas Products Ltd
Product Type
Wallplate Elbow
Connection
15mm Compression x ½" BSP Female (Parallel)
Angle
90°
Material
Brass
Finish
Brass
Mounting
Wallplate with Fixing Holes
Pipe Compatibility
Copper Tube to BS EN 1057
Standard/Approval
BS EN 1254-2, WRAS Approved
Suitable Applications
Water, Heating, and Low-Pressure Gas (Above Ground, Max 5 Bar per EN 1775)
Features
Wallplate Elbow - 15mm Compression x 1/2" BSP Female Features
15mm Compression x ½" BSP Parallel Female: Connects copper pipe to a threaded outlet.
90° Wallplate Design: Integral mounting holes allow the fitting to be secured to a surface.
Brass Body: Durable and corrosion resistant.
Olive-Based Compression Seal: Grips copper pipe mechanically for a watertight connection.
Heat-Free Installation: No soldering or naked flame required.
WRAS Approved, BS EN 1254-2: Suitable for potable water and low-pressure gas up to 5 bar (per EN 1775).
Questions
Reviews
Wallplate Elbow - 15mm Compression x 1/2" BSP Female Reviews
