Cavagna 28mbar Butane Gas Regulator - 21mm Clip-On
-
50 +£7.08 £5.90 eachsave 4%
You might also like:
Need a butane regulator for a 21mm clip-on cylinder? The Cavagna 28mbar Butane Gas Regulator – 21mm Clip-On pushes straight onto the cylinder valve with no tools or spanners. It then delivers butane at 28mbar through an 8mm (5/16") hose nozzle, the pressure that butane stoves, heaters and BBQs are normally set up to run on.
It is a single-stage low pressure regulator with a 1.3 kg/h capacity and a reinforced diaphragm. That makes it a practical choice for a caravan or motorhome gas supply, a camping cooker, a patio heater or an outdoor cooking set-up. If your current regulator is worn, damaged or no longer clips on securely, this is a like-for-like replacement for a 21mm clip-on butane connection.
The 21mm clip-on is the size commonly used on UK butane cylinders such as Calor butane, but cylinder connections vary, so check your cylinder before you order. This regulator is for butane only and must not be used on propane. UK propane cylinders typically use a 27mm clip-on and Irish cylinders typically use a 35mm clip-on, so neither fits this regulator. Check your appliance data plate to confirm it needs 28mbar butane.
Push 8mm bore gas hose onto the nozzle and secure it with a suitable hose clip. Leak test every connection with leak detection fluid before use. Fixed gas installations and appliance connections should be carried out by a registered gas installer. The regulator is backed by a 5-year warranty.
If your butane appliance runs at 28mbar and your cylinder has a 21mm clip-on connection, this regulator gives you a tool-free fit, an 8mm hose nozzle and a 5-year warranty in one part. If you are not sure whether your cylinder is 21mm, 27mm or 35mm, contact our team before ordering and we will help you check.
Order the Cavagna 28mbar Butane Gas Regulator – 21mm Clip-On online today.
| Brand | Cavagna |
|---|---|
| Product Type | Low Pressure Butane Gas Regulator |
| Gas Type | Butane only |
| Approvals | CE 0085-21 & EN 16129 |
| Connection | Clip-On x Hose Nozzle |
| Operating Pressure | 28mbar |
| Capacity/Flow Rate | 1.3 kg/h |
| Inlet Connection | 21mm Clip-On |
| Outlet Connection | 8mm (5/16") Hose Nozzle |
| Stage | Single Stage Low Pressure Butane |
| Reinforced Diaphragm | Yes |
| Warranty | 5 Years |