Pegler VSH Xpress Gas Fitting Reducer - 42 x 28mm
You might also like:
Gas pipework needs a fitting made for gas, and a press-fit one avoids a flame in the joint. The Pegler Yorkshire VSH XPress Gas Reducer is an SG6 copper reducer with a 28mm press end on one side and a plain 42mm male end on the other. The 42mm male end pushes into another XPress gas fitting, and the 28mm end is pressed onto 28mm copper tube. It’s for internal and external above-ground 2nd and 3rd family gas installation pipework, which means natural gas and LPG.
It’s BSI Kitemark approved to BS 8537:2010. A yellow HNBR O-ring and a permanent yellow gas marking identify it as a gas fitting. The press end is for use with BS EN 1057 R250 and R290 copper tube with M-profile jaws, and it carries Pegler’s 25-year guarantee when used with copper tube to BS EN 1057 (conditions apply).
Pegler gives the working pressure as 1 bar inside buildings and 5 bar outside buildings (maximum test pressure 7.5 bar), at -20°C to 70°C. Check that every joint is pressed and tested as part of your installation process. Don’t use the water-range XPress fittings on gas. Note that it has one press end and one male end, so check you need this type of reducer and not one with two press ends. Gas work must be carried out by a suitably qualified, registered gas installer in accordance with the relevant standards.
For stepping a 42mm gas run down to 28mm without a flame, this Kitemarked reducer goes straight into the next XPress gas fitting. It’s marked yellow for gas and rated to 1 bar inside and 5 bar outside buildings.
Order the Pegler Yorkshire VSH XPress 42 x 28mm Gas Reducer online today.
| Brand | Pegler Yorkshire |
|---|---|
| Product Code | 39756 (SG6) |
| Product Type | XPress Gas Reducer (Male x Press) |
| Size | 42mm x 28mm |
| Ends | 42mm Male (Plain Spigot) x 28mm Press |
| Material | Copper |
| Approvals | BSI Kitemark (BS 8537:2010) |
| For Use With | BS EN 1057 R250 / R290 Copper Tube |
| Connection | Press (M Profile) |
| Working Pressure | 1 bar Inside Buildings; 5 bar Outside Buildings |
| Maximum Test Pressure | 7.5 bar |
| Temperature Range | -20°C to 70°C |
| O-Ring | Yellow HNBR |
| Guarantee | 25 Years With BS EN 1057 Copper Tube (Conditions Apply) |
| Suitable Applications | Above-Ground 2nd and 3rd Family Gas (Natural Gas and LPG), Installed by a Registered Gas Installer |