Pegler VSH Xpress Gas 45° Street Elbow - 22mm
You might also like:
The Pegler Yorkshire VSH XPress Gas 45° Street Elbow changes direction by 45° on 22mm copper gas pipework. It has a press end and a plain 22mm tube end, and the press end is joined with a press tool, so no flame or heat is needed.
It is Kitemarked to BS 8537:2010 and Gastec approved, and is made for natural gas services in domestic and commercial buildings. The working pressure is 1 bar inside buildings and 5 bar outside buildings above ground, from -20°C to 70°C. A yellow O-ring and clear marking on the fitting identify it as part of the gas range.
For gas only. Do not use water range fittings on gas, and do not use this fitting on soft R220 copper. Check that the gas type and pressure suit the installation, leak test all connections, and have the installation carried out by a registered gas installer.
This street elbow changes direction by 45° on 22mm copper gas pipework with a press joint that needs no flame or heat. It is Kitemarked to BS 8537:2010 and Gastec approved, and the yellow O-ring and marking identify it as a gas fitting.
Order the Pegler VSH Xpress Gas 45° Street Elbow - 22mm online today.
| Brand | Pegler Yorkshire Xpress |
|---|---|
| Approvals | Gastec Approved |
| Kitemark | BS 8537:2010 |
| For Use With | Copper tube to BS EN 1057 R250/R290 (not R220 soft copper) |
| Connection Type | Press x Tube End |
| Suitable For | Natural Gas & LPG |
| Working Pressure | 1 bar (inside buildings), 5 bar (outside buildings, above ground) |
| Temperature Range | -20°C to 70°C |
| Equal/Reducing | Equal |
| Fitting Type | 45° (Obtuse) Street Elbow |
| Material | Copper |
| Size | 22mm |
| Application | Domestic and commercial gas services |