The Honeywell R200C-1 Carbon Monoxide (CO) Alarm is designed to alert residents to any build-up of Carbon Monoxide gas. Ideal for installation where occupants spend the most time or in rooms containing a fuel-burning appliance.
| Power Supply | Battery |
|---|---|
| Literature Language | English, French, Spanish, German, Italian, Dutch, Swedish, Portuguese |
| Application | Carbon Monoxide (CO) is an invisible, odourless and tasteless gas that is toxic to humans and animals, not to be confused with Carbon Dioxide (CO2). In various countries, thousands of people are treated in hospitals for CO poisoning every year. It is often referred to as the "Silent Killer" because we can't smell, taste, or see it. |
| Radio Frequency Range | Not Applicable |
| Approvals and Standards | EN 62368-1:2014, EN IEC 63000:2018, EN 50270:2015, EN 50291, NF, Kitemark, B-Mark |
| Protection Class | IP44 |
| Includes | Package and manual in: English, French, Spanish, German, Italian, Dutch, Swedish, Portuguese |
| Sound Level | >= 85dB @3m |
| Product Height | 95 mm |
| Product Length | 95 mm |
| Ambient Operating Temperature (Max) | +40 ˚C |
| Product Width | 25 mm |
| Ambient Operating Temperature (Min) | -10 ˚C |
| Product Weight | 120 g |
| Mounting Location | Wall, Ceiling |
| Colour | White |
| Operating Voltage | 3VDC |
| Shipping and Storage Temperature (Max) | +45 ˚C |
| Shipping and Storage Temperature (Min) | -15 ˚C |
| Recommended Service Life | 10 years |
| Battery Life | 10 years |
| Battery Type | CR17450 3V Sealed Lithium |
| Fault Indicator Light | Indicator Light |
EN50291 defines the CO level at which the device must signal an alarm. The higher the CO concentration, the quicker the device will start an alarm. This is because CO health risk is a function of CO concentration and exposure time.
Our R200C-1 comes with a ten-year battery to give you peace of mind. The only maintenance required is an occasional clean.
If your alarm is triggered when you're away from home, the red light will flash for 48 hours.
CO alarms should be exchanged after their endend-of-life date. The lifetime is mainly determined by the CO sensor (in the case of R200C - 10 years). EN50292 requires all CO alarms to have an end-of-life signal, which is implemented in all Honeywell Home CO alarms
At just 25mm, this is one of the thinnest CO alarms on the market, making it compact, easy to install and beautifully designed to fit into any home.
The whole surface of the R100C-1 is the TEST/MUTE button, making it much quicker and easier to operate.
In addition to its loud alarm, R200C-1 flashes the word 'ALARM' in bright red letters to warn deaf or hard of hearing occupants of danger.
You may want to mute the loud 85dB alarm, e.g. when calling the emergency services. Pressing the Alarm Hush button will mute the alarm for 10 minutes. The alarm light will flash as long as the unit detects a threat.
A typical fault would be a low battery. The alarm will flash the fault light and beep once per minute. The Fault Hush allows you to mute the beep for 9 hours.
Sleep easy with Do Not Disturb
Special sensors in the alarm detect ambient light levels and dim the green 'Power' light to match them, giving you a good night's sleep.
Landlords want to ensure that tenants cannot deactivate alarms. R200C-1 has sealed batteries that cannot be easily removed. Also, the removal of an installed alarm requires a tool.
