A press-fit joint is only as good as the jaw that makes it. This pack of four Alpha Press 19kN compact crimping jaws covers the four common sizes of TH profile composite pipe fittings: 16, 20, 26 and 32mm.
The jaws are made from heat-treated, hardened steel and hot-dip zinc coated for corrosion protection. They fit Alpha Press 19kN presses, the SL-1930, BZ-1930 and PZ-1930, and the supplier also lists them for a number of other 19kN press tools (see the specification table).
TH is a specific jaw profile for multilayer composite pipe systems, and the supplier lists it for fittings from Viega, Wavin, Unipipe/Unicor, Henco, Comap/Purmo and Tiemme. It gives a slightly different compression geometry from the U profile, and the two aren’t interchangeable. Always follow the fitting manufacturer’s recommendation and use the jaw profile they specify, to keep the joint and the warranty valid.
If you press TH profile composite pipe, this four-jaw pack covers 16, 20, 26 and 32mm for your 19kN press in one go. The jaws are hardened and zinc coated, and the supplier lists them for several other 19kN tools too. Check the fitting maker’s required profile before you buy.
Order the Alpha Press TH Profile 19kN Compact Crimping Jaws 4-Pack online today.
| Brand | Alpha Press |
|---|---|
| Product Code | TH1632-19-JAW-P |
| Product Type | Press Fit Crimping Jaws, Compact |
| Profile | TH |
| Sizes in Pack | 16mm, 20mm, 26mm, 32mm |
| Force Rating | 19kN |
| Material | Heat-Treated Hardened Steel, Hot-Dip Zinc Coated |
| Alpha Press Tools | SL-1930, BZ-1930, PZ-1930 |
| Other Tools (Supplier-Listed) | Novopress ACO103, ACO102; Ridgid RP240, RP241; Klauke MAP219; Vetec SPM19; Virax M21+ / ML21+; Milwaukee M12, M-Press MP1528, Z-Press PZ-1930, MP-1930, Instantor Mini IT2030, IT2020 |
| Note | TH and U Profiles Aren't Interchangeable; Follow the Fitting Manufacturer's Profile |
