125mm x 32mm Yellow MDPE Electrofusion Tapping Tee
You might also like:
Adding a service connection to an existing gas main normally means cutting into the main and fitting a tee. A tapping tee avoids that: it’s electrofused onto the outside of the pipe, and a cutter then opens the branch, so the connection becomes part of the main.
This yellow electrofusion tapping tee gives a 32mm branch from a 125mm MDPE (PE80) gas main. It’s made in yellow PE80 for use with PE80 gas pipe, and is manufactured to the requirements of GIS/PL2-4 (formerly B.G. Transco Technical Standard PL2 Part 4). It’s supplied in an individual sealed bag to protect the jointing surfaces from contamination before installation, so the fusion surfaces stay clean.
The maximum operating pressure depends on the pipe and the fitting, so always check the fitting’s packaging label. Electrofusion needs a compatible electrofusion control unit, correct pipe preparation and a trained installer, and the tee must be installed and the branch opened in accordance with the manufacturer’s instructions. Gas work, including any work on a gas main, must be carried out by a suitably qualified, registered gas installer in accordance with the relevant standards.
When a new service line needs connecting to a 125mm gas main, a tapping tee fuses on and opens the branch without cutting the main in two. It’s made in PE80 to match PE80 gas pipe, comes sealed in its own bag to keep the jointing surfaces clean, and is made to the gas fittings standard.
Order the 125mm x 32mm Yellow Electrofusion Tapping Tee online today.
| Brand | Radius |
|---|---|
| Product Type | Electrofusion Tapping Tee |
| Main Pipe Size | 125mm |
| Branch Size | 32mm |
| Material | Medium Density Polyethylene (MDPE), PE80 |
| Colour | Yellow |
| Standard | GIS/PL2-4 (Formerly B.G. Transco PL2 Part 4) |
| Packaging | Individual Sealed Bag |
| Operating Pressure | 5.5 bar |
| Suitable Applications | Natural Gas (Installed by a Registered Gas Installer) |