A 30m coil of soft copper tube covers long runs in a single length, which means far fewer joints than working from straight lengths. This 8mm x 30m coil is soft (annealed) copper tube with a 1.0mm wall, manufactured to BS EN 1057:2006+A1:2010, the European standard for seamless round copper tube for water and gas in sanitary and heating applications.
The soft temper bends by hand or with a tube bender, so it routes around obstacles in tight or awkward spaces. It suits hot and cold water, central heating and gas pipework where 8mm is the right size, and it's joined with 8mm compression fittings, so no soldering is needed. Gas work must be carried out by a suitably qualified, registered gas installer, who will assess whether 8mm is the right size for the load.
Key Features & Benefits
8mm Outside Diameter, 1.0mm Wall: A heavier wall for an 8mm tube.
30m Coil: One long length that cuts the number of joints in longer runs.
Soft (Annealed) Copper: Bends by hand or with tube benders around confined or curved routes.
Manufactured to BS EN 1057:2006+A1:2010: The standard for copper tube for water and gas pipework.
Natural Copper Finish: Copper resists corrosion for long service life.
Works with 8mm Compression Fittings: A flame-free joint with no soldering.
Ideal For
Hot and cold water pipework.
Central heating pipework.
Gas pipework where 8mm is the correct size, installed by a registered gas installer.
Longer runs and retrofit jobs where joints need to be kept to a minimum.
Why Buy This Product?
On a long run, fewer joints means fewer places for a leak to develop and less time spent making them. Made to BS EN 1057 and sized to match our 8mm compression fittings, a 30m coil is a practical way to stock up for water, heating and gas jobs where 8mm is the right size.
Order the 8mm x 30 Metres Copper Pipe Coil online today.
Specification
8mm x 30 Metres Copper Pipe Coil Specification
Brand
Hamilton Gas Products
Part Number
MCT8-8-30
Product Type
Copper Tube Coil
Material
Soft (Annealed) Copper
Outside Diameter
8mm
Wall Thickness
1.0mm
Length
30 Metres (Coiled)
Standard
BS EN 1057:2006+A1:2010
Finish
Natural Copper
Fitting Compatibility
8mm Compression Fittings
Suitable Applications
Water, Heating, Gas (Installed by a Registered Gas Installer)
Features
8mm x 30 Metres Copper Pipe Coil Features
8mm Outside Diameter, 1.0mm Wall: A heavier wall for an 8mm tube.
30m Coil: One long length that cuts the number of joints in longer runs.
Soft (Annealed) Copper: Bends by hand or with tube benders around confined or curved routes.
Manufactured to BS EN 1057:2006+A1:2010: The standard for copper tube for water and gas pipework.
Natural Copper Finish: Copper resists corrosion for long service life.
Works with 8mm Compression Fittings: A flame-free joint with no soldering.
