Taking a smaller branch off a larger main run is a common requirement in mixed-size pipework, and a reduced-branch tee does it in one fitting. This tee connects two 22mm pipes in line with a 15mm branch at 90°, using compression joints that need no soldering or heat.
Manufactured to BS EN 1254-2 in brass, it's suitable for above-ground hot and cold water services and heating installations, and for low-pressure gas. Where used on natural gas or LPG, EN 1254-2 fittings are limited to a maximum operating pressure of 5 bar in accordance with EN 1775, which is worth keeping in mind when specifying for a gas application.
Taking a 15mm branch off a 22mm main with a single reduced-branch tee means one joint instead of a straight tee plus a separate reducer, which is one fewer connection point where a leak could develop. Manufactured to BS EN 1254-2, it's a fitting you can specify with confidence on water, heating, and low-pressure gas work.
Order the Brass Compression Tee with Reduced Branch 22mm x 15mm x 22mm online today.
| Brand | Hamilton Gas Products |
|---|---|
| Product Type | Compression Tee with Reduced Branch |
| Standard | BS EN 1254-2 |
| Angle | 90° |
| Connection | Compression |
| Size | 22mm x 15mm x 22mm |
| Run Ends (A and B) | 22mm |
| Branch | 15mm |
| Equal/Reducing | Reducing |
| Material | Brass |
| Finish | Brass |
| Suitable Applications | Water, Heating, and Low-Pressure Gas (Above Ground, Max 5 Bar for Natural Gas/LPG per EN 1775) |
