A union or flat-seat joint seals on its washer, so a worn or missing washer means a leak. These Regin 1/2" fibre washers are replacement sealing washers, supplied 8 to a pack, made from non-asbestos fibre to BS 7531 grade Y.
Each washer measures 18.5mm outside diameter x 14.2mm inside diameter x 1.5mm thick. They’re suitable for oils, fuels, low pressure steam and water, and Regin states they have excellent resistance to gas leakage. They’re made with a WRAS-approved material suitable for potable water and natural gas. The recommended maximum temperature is 300°C (180°C for steam).
Use them on flat-seat connections such as unions, and follow the fitting maker’s instructions. A joint that seals on a washer doesn’t need PTFE tape or sealant. Gas work must be carried out by a suitably qualified, registered gas installer in accordance with the relevant standards.
Key Features & Benefits
1/2" Fibre Washers: 18.5mm OD x 14.2mm ID x 1.5mm thick.
Non-Asbestos Fibre: BS 7531 grade Y, general-purpose commercial material.
WRAS-Approved Material: Suitable for potable water and natural gas.
Oils, Fuels, Steam and Water: Suitable for oils, fuels, low pressure steam and water.
Excellent Resistance to Gas Leakage: Manufacturer-stated.
Pack of 8: Spares for maintenance and repair.
Ideal For
Replacing worn washers on unions and flat-seat connections, with gas work done by a registered gas installer.
Natural gas, potable water, oil and fuel connections.
Low pressure steam connections up to 180°C.
Service and maintenance kits.
Why Buy This Product?
When a union or flat-seat joint starts leaking, a new washer is usually the fix. This pack of 8 is made from non-asbestos fibre to BS 7531, suits water, oils, fuels, low pressure steam and natural gas, and covers a lot of repairs.
Order the Regin 1/2" Fibre Washers – Pack of 8 online today.
Specification
Regin 1/2" Fibre Washers – Pack of 8 Specification
Brand
Regin
Product Code
REGQ110
Product Type
Fibre Sealing Washers
Pack Quantity
8
Size
1/2"
Dimensions
18.5mm OD x 14.2mm ID x 1.5mm
Material
Non-Asbestos Fibre, BS 7531 Grade Y
Approval
WRAS-Approved Material
Maximum Temperature
300°C (180°C for Steam)
Suitable Applications
Oils, Fuels, Low Pressure Steam, Water, Potable Water, Natural Gas
Features
Regin 1/2" Fibre Washers – Pack of 8 Features
1/2" Fibre Washers: 18.5mm OD x 14.2mm ID x 1.5mm thick.
Non-Asbestos Fibre: BS 7531 grade Y, general-purpose commercial material.
WRAS-Approved Material: Suitable for potable water and natural gas.
Oils, Fuels, Steam and Water: Suitable for oils, fuels, low pressure steam and water.
