Pegler VSH Xpress Water Male Coupling - 28mm x 1" BSP M
You might also like:
Joining 28mm copper tube to a 1" threaded fitting without a flame is what this press-fit male coupling is for. The Pegler Yorkshire VSH XPress Water Male Coupling has a press end for 28mm copper tube and a 1" BSP taper male thread, so it connects copper pipework to a female BSP taper threaded fitting. It is a water-range XPress fitting, for use on hot and cold water services and on vented and unvented closed circuit heating and chilled water applications.
The fitting is BSI Kitemark approved to BS 8537:2010 and is WRAS and Kiwa approved. The press end is for use with copper tube to BS EN 1057 R250 and R290 and M-profile press jaws, and the 25-year Pegler guarantee applies when it is used with copper tube to BS EN 1057 (conditions apply). The Leak Before Press feature means a fitting that has not been pressed shows up when you pressure test the system.
The fitting is rated at 16 bar from -20°C to 110°C. Don’t use water-range XPress fittings on gas. For gas pipework use the XPress Gas range, which has its own approvals and lower pressure limits. Seal the threaded connection with a thread sealant suitable for the application, press every joint and test the system as part of your installation process.
For a 28mm copper to 1" BSP taper male connection on a water system, this XPress fitting gives you a heat-free press joint with a Kitemark and a 16 bar rating. If you are not sure you need a 1" BSP taper male thread, contact our team before you order.
Order the Pegler Yorkshire VSH XPress 28mm x 1" BSP Male Water Coupling online today.
| Brand | Pegler Yorkshire XPress |
|---|---|
| Product Code | 38118 |
| Product Type | XPress Water Straight Male Connector (Press x BSP Taper Male) |
| Size | 28mm x 1" BSP Taper Male |
| Equal/Reducing | Adapting |
| Material | Copper |
| Approvals | WRAS & Kiwa; BSI Kitemark (BS 8537:2010) |
| For Use With | BS EN 1057 R250 / R290 Copper Tube |
| Connection | Press (M Profile) x BSP Taper Male |
| For Use With | Water Only, Not for Gas |
| Maximum Operating Pressure | 16 bar |
| Temperature Range | -20°C to 110°C |
| Guarantee | 25 Years With BS EN 1057 Copper Tube (Conditions Apply) |
| Suitable Applications | Hot & Cold Water Services; Vented & Unvented Closed Circuit Heating; Chilled Water |