Pegler VSH Xpress Gas Male Coupling - 35mm x 1" BSP M
You might also like:
Connecting 35mm copper gas pipework to a 1" threaded fitting without a flame is what this press-fit male coupling is for. The Pegler Yorkshire VSH XPress Gas Male Coupling has an M-profile press end for 35mm copper tube and a 1" BSP male thread, and it is for internal and external above-ground 2nd and 3rd family gas installation pipework, which means natural gas and LPG.
The fitting is BSI Kitemark approved to BS 8537:2010. A yellow HNBR O-ring and prominent marking on the outside of the fitting identify it as a gas fitting. The press end is for use with copper tube to BS EN 1057 R250 and R290 and M-profile jaws, and it is not suitable for soft copper tube (R220). The 25-year Pegler guarantee applies when it is used with copper tube to BS EN 1057 (conditions apply).
Working pressure is 1 bar inside buildings and 5 bar outside buildings (maximum test pressure 7.5 bar), at -20°C to 70°C, for above-ground use only. Check that every joint is pressed and tested as part of your installation process. Don’t use the water-range XPress fittings on gas. Seal the threaded connection with a jointing compound or tape approved for gas. Gas work must be carried out by a suitably qualified, registered gas installer in accordance with the relevant standards.
For a 35mm copper to 1" BSP male connection on gas pipework, this XPress fitting gives you a heat-free press joint with a Kitemark, a yellow O-ring for easy identification and ratings of 1 bar inside and 5 bar outside buildings. If you are not sure you need a 1" BSP male thread, contact our team before you order.
Order the Pegler Yorkshire VSH XPress 35mm x 1" BSP Male Gas Coupling online today.
| Brand | Pegler Yorkshire XPress |
|---|---|
| Product Code | 39738 (SG3) |
| Product Type | XPress Gas Male Coupling (Press x BSP Male) |
| Size | 35mm x 1" BSP Male |
| Equal/Reducing | Adapting |
| Material | Copper / Copper Alloy |
| Approvals | BSI Kitemark (BS 8537:2010) |
| For Use With | BS EN 1057 R250 / R290 Copper Tube (Not R220 Soft Copper) |
| Connection | Press (M Profile) x BSP Male |
| Working Pressure | 1 bar Inside Buildings; 5 bar Outside Buildings |
| Maximum Test Pressure | 7.5 bar |
| Temperature Range | -20°C to 70°C |
| O-Ring | Yellow HNBR |
| Guarantee | 25 Years With BS EN 1057 Copper Tube (Conditions Apply) |
| Suitable Applications | Above-Ground 2nd and 3rd Family Gas (Natural Gas and LPG), Installed by a Registered Gas Installer |