The Navien NPE-32SWE Standard Gas Water Heater is a tankless water heating system that is high-performance and reliable. With over 10 years as the No.1 selling tankless water heater in North America, this system is trusted by homeowners and businesses worldwide.
Dual stainless steel heat exchangers give maximum performance and durability while reducing energy consumption. The unit delivers up to 32 litres per minute at a 25°C temperature rise, suited to the most demanding applications. It ships configured for Natural Gas as standard; conversion to Propane (LPG) is possible using a separate conversion kit fitted by a qualified engineer.
Up to 16 units can be cascaded with Ready-Link® for increased output, balancing workloads for longer system life. Freeze protection allows operation down to -40°C, and a backlit control panel simplifies setup, operation and troubleshooting with text and icons.
The unit can be installed internally or externally, with the flue also installable externally, for locations with limited internal space or complex flue runs. Built-in full frost protection allows reliable operation in any weather condition.
At 56.6kW and 32 l/min, this is the higher-capacity variant in the Standard range, suited to larger properties or commercial applications with greater simultaneous hot water demand than the 24SWE can comfortably handle. The Standard range gives the same durable dual stainless steel heat exchangers and cascading capability as the Advanced range, at a lower cost where the ComfortFlow buffer tank isn't specifically needed.
Order the Navien NPE-32SWE Standard Natural Gas Water Heater online today.
| Brand | Navien |
|---|---|
| Product Type | Tankless Multi-Point Gas Water Heater |
| Installation | Internal & External Wall Mounted |
| Heat Output | 56.6 kW |
| Gas Type | Natural Gas (Factory Standard); Field-Convertible to LPG via Kit |
| Hydrogen Compatibility | 20% Hydrogen Blend Ready |
| Flow Rate | 32 ltr/min, Rise 25°C |
| NOx Emissions | 23 mg/kWh |
| Exhaust System | Room Sealed |
| Temperature Range | 36°C - 85°C |
| Ignition Type | Direct Electronic |
| Dimensions (H x W x D) | 695mm x 440mm x 336mm |
| Gas Consumption (Natural Gas) | 5.2 - 52.8kW Max |
| Weight | 34kg |
| Nominal Operating Pressure | 1 - 10 bar |
| Electrical Consumption | 200W (Max) |
| Flue Type | Push Fit System Coaxial Ø60/100 |
| Regulation Compliance | ECO-DESIGN |
| Frost Protection | Built-In |
| Minimum Operating Flow Rate | 2 ltr/min |
| Warranty | Five Year Manufacturer Supported Parts & Labour Warranty (T&Cs Apply) |
