The Navien NPE-24SWE Standard Gas Water Heater is a tankless water heating system that is high-performance and reliable. With over 10 years as the No.1 selling tankless water heater in North America, this system is trusted by homeowners and businesses worldwide.
Dual stainless steel heat exchangers give maximum performance and durability while reducing energy consumption. The unit delivers up to 24 litres per minute at a 25°C temperature rise, suited to demanding applications. This version is factory-configured for LPG.
Up to 16 units can be cascaded with Ready-Link® for increased output, balancing workloads for longer system life. Freeze protection allows operation down to -40°C, and a backlit control panel simplifies setup, operation and troubleshooting with text and icons.
The unit can be installed internally or externally, with the flue also installable externally, for locations with limited internal space or complex flue runs. Built-in full frost protection allows reliable operation in any weather condition.
The Standard range gives the same dual stainless steel heat exchangers, flow rate and cascading capability as the Advanced range, at a lower cost where the ComfortFlow buffer tank and recirculation system isn't specifically needed. For properties off the mains gas grid, a purpose-built LPG configuration removes any doubt about correct setup for the fuel actually being used. *Please note this water heater includes an easy to fit LPG conversion kit, allowing you to seamlessly switch between natural gas and liquid petroleum gas for uninterrupted hot water
Order the Navien NPE-24SWE Standard LPG Gas Water Heater online today.
| Brand | Navien |
|---|---|
| Product Type | Tankless Multi-Point Gas Water Heater |
| Installation | Internal & External Wall Mounted |
| Heat Output | 42.3 kW |
| Gas Type | LPG |
| Bio-LPG Compatibility | Yes (Please Confirm with Supplier) |
| Flow Rate | 24 ltr/min, Rise 25°C |
| NOx Emissions | 25 mg/kWh |
| Exhaust System | Room Sealed |
| Temperature Range | 36°C - 85°C |
| Ignition Type | Direct Electronic |
| Dimensions (H x W x D) | 695mm x 440mm x 336mm |
| Gas Consumption (LPG) | 4 - 39.6kW Max |
| Weight | 30kg |
| Nominal Operating Pressure | 1 - 10 bar |
| Electrical Consumption | 200W (Max) |
| Flue Type | Push Fit System Coaxial Ø60/100 |
| Regulation Compliance | ECO-DESIGN |
| Frost Protection | Built-In |
| Minimum Operating Flow Rate | 2 ltr/min |
| Warranty | Five Year Manufacturer Supported Parts & Labour Warranty (T&Cs Apply) |
