10mm Red Reinforced PVC Hose - 30m Non-Toxic Hot Water | Caravan & Motorhome
A 30 metre length of red 10mm PVC hose with a textile braid reinforcement for hot water transfer in caravan, motorhome and campervan internal water systems. This reinforced hose has a 13 bar working pressure and 40 bar burst pressure. The operating temperature range is a comfy -15 to +60°C. You can connect it to your system using push-fit, barbed or serrated fittings and secure with clips or crimps.
This red 10mm reinforced PVC water hose is by far the most popular choice for internal water systems in leisure vehicles - it's non-toxic, so it's safe to use for potable hot water supply lines, and the 10mm inner diameter is the size that's used in caravan, motorhome and campervan plumbing systems which have standard push-fit fittings.
The textile braid reinforcement gives this non-toxic hose a working pressure of 13 bar and a burst pressure of 40 bar - which is plenty above mains water pressure and perfect for pressurised caravan water systems. The red colour is the standard for hot water supply lines, so it's easy to spot it in an installed system and tell it apart from other hose types when you're installing or maintaining it. At 15mm outer diameter it's a snug fit over standard barbed fittings and will go right into standard push-fit connectors without any adapters. And it can handle temperatures from -15 to +60°C without any problems, so whether you're storing your van in winter or touring in the summer, this hose will keep performing. This hose comes in a 30m length.
Key Features & Benefits
Non-Toxic Construction - okay for drinking water transfer in caravan, motorhome and campervan water systems without any worries.
10mm Inner Diameter - standard size for water systems in leisure vehicles, so it's all good with push-fit and barbed fittings
13 Bar Working Pressure - plenty of headroom above mains water pressure, so it's suitable for caravan and motorhome water systems.
40 Bar Burst Pressure - a nice safety margin above the working pressure rating, so you can feel safe using it.
Textile Braid Reinforcement - gives the hose the structure it needs without making it too stiff or hard to route.
Red Colour - Hot Water Symbol - the industry standard red colour tells you this is a hot water supply line, which makes it easy to spot in your system.
Operating Temperature -15 to +60°C - suitable for use in cold winter storage and warm weather touring without degrading.
Universal Fitting Compatibility - push-fit, barbed or serrated fittings are all good, and you can secure it with clips or crimps.
30 Metre Length - long enough to do a full van refit or a few shorter runs without having to join it up.
Ideal For
Caravan hot water systems
Motorhome water supply plumbing
Campervan water systems
Leisure vehicle refurbishment and replumbing
Using for hot water at mains pressure
Leisure market plumbers and vehicle converters
Why Buy This Hose?
Non-toxic is important in a drinking water system - standard PVC hose isn't rated for potable water use. The non-toxic spec here confirms it's safe for hot water supply lines where the water will be drunk, which is the correct spec for a caravan or motorhome water system.
10mm is the standard size for caravan plumbing - caravan and motorhome push-fit fittings are all sized for 10mm hose, so it fits perfectly without any issues.
13 bar rating is more than enough for caravan water systems - high-output pumps in vans and motorhomes don't reach that kind of pressure, so this hose has plenty of headroom.
30 metres covers a whole van conversion or caravan replum - routing water supply lines through a van chassis from tank to all outlets can take a bit of hose. 30 metres covers most full vehicle water system installations in one length.
The right hose for caravan and motorhome hot water systems. Our 10mm ID Red Reinforced PVC Hose 30m is in stock and ready to ship. Order now and plumb your van or motorhome with the correct hot water hose.
