Bullfinch 1210 Burner – 1.3kW Small Flame | Window Sash & Central Heating
This burner has a smaller flame for tighter access. It's suitable for soldering inside window frames or along central heating pipes where there is limited space around the area being heated. At 1.3 kW, this burner produces a 140mm × 14mm flame and uses 94 g / h. Its compact size, measuring 83 x 16 mm, makes it ideal for very confined working conditions. This can be used with the 1185, 1245 and 1340 Bullfinch handles. Comes with a 5 year warranty that meets BS EN ISO 9002 standards.
There are several sizes available within the Bullfinch Standard Range. The 1210 is the lowest wattage option (1.3 kW), which is higher than the Precision Option (1472) and lower than the General Purpose Option (1230). The narrow flame produced by the 1210 (140mm × 14mm) will allow you to apply localised heat, allowing you to solder in confined areas such as window frame joints without damaging nearby surfaces.
At 1.3kW and 94g/h it is efficient for sustained close-work use. Like all other Bullfinch Standard options, the 1210 can attach to either of the three Bullfinch Standard handles (1185, 1245 and 1340) because they both have a standard Whitform 1" × 26 TPI Male Outlet Thread.
Key Features & Benefits
140mm × 14mm Narrow Flame — Focused heat for confined access work — minimal collateral heat in tight spaces.
1.3kW Output at 1 Bar — Controlled output for precise heating tasks — between the 1472 precision burner and the 1230 general purpose burner.
94g/h Gas Consumption — Efficient for sustained close-access work.
Compact 83 × 16mm Body — Fits into narrow spaces where larger burners cannot reach.
Fits Bullfinch 1185, 1245 & 1340 Handles — Direct fit across the Bullfinch Standard handle range.
BS EN ISO 9002 Certified
5-Year Warranty
Ideal For
Narrow window sash soldering & leading
Central heating pipe soldering in tight runs
Confined access brazing & soldering
Bullfinch 1185, 1245 & 1340 handle owners
Precise, narrow flame for confined access soldering. Order today and add controlled small-flame heating capability to your Bullfinch Standard torch setup.
Specification
Bullfinch 1210 Burner for Standard Gas Blow Torch Specification
Brand
Bullfinch
Model
1210
Burner Dimensions
83 × 16mm
Flame Dimensions
140mm length × 14mm width
Heat Output
1.3 kW (4,435 Btu/hr) at 1 bar
Gas Consumption
94 g/h at 1 bar
Jet Size
6B
Outlet Thread
1" × 26 tpi whit form male
Compatible Handles
Bullfinch 1185, 1245 & 1340
Certification
BS EN ISO 9002
Suitable Applications
Gas welding, brazing, soldering – window sash & central heating
Warranty
5 years against faulty components and workmanship
Features
Bullfinch 1210 Burner for Standard Gas Blow Torch Features
140mm × 14mm Narrow Flame — Focused heat for confined access work — minimal collateral heat in tight spaces.
1.3kW Output at 1 Bar — Controlled output for precise heating tasks — between the 1472 precision burner and the 1230 general purpose burner.
94g/h Gas Consumption — Efficient for sustained close-access work.
Compact 83 × 16mm Body — Fits into narrow spaces where larger burners cannot reach.
Fits Bullfinch 1185, 1245 & 1340 Handles — Direct fit across the Bullfinch Standard handle range.
BS EN ISO 9002 Certified
5-Year Warranty
Questions
Reviews
Bullfinch 1210 Burner for Standard Gas Blow Torch Reviews
