Anton C03738-B Pro Bent Flue Gas Probe – 90° Bend | For Anton Sprint Pro Flue Gas Analysers
The Anton C03738-B is a bent flue gas probe for the Sprint Pro range, built for test points a straight probe can't reach — a tight boiler cupboard, an awkward position on the flue, or a port set close against a wall. The 90° bend lets the probe tip reach the flue gas stream from an angle rather than requiring a straight run into the flue.
It shares the same core specification as the straight C03738: a stainless steel shaft with a built-in thermocouple, 250mm insertion length with an adjustable depth gauge, and an ergonomic grip. An in-line water trap with a built-in water block and dust filter protects the analyser's sensors from moisture and debris drawn in with the sample, and a bespoke connector with a secondary water block filter adds further protection at the connection point. The hose runs 2164mm.
Key Features & Benefits
90° Bend: Accesses flue ports and test points a straight probe can't reach due to restricted space or awkward positioning.
Compatible with Anton Sprint Pro Flue Gas Analysers: Fits the Sprint Pro range.
Stainless Steel Shaft with Built-In Thermocouple: Durable construction with integrated temperature measurement.
In-Line Water Trap with Water Block and Dust Filter: Protects the analyser's sensors from moisture and particulate drawn in with the sample.
Bespoke Connector with Secondary Water Block Filter: Additional protection at the analyser connection point.
Ergonomic Grip: Comfortable handling for repeated use.
2164mm Hose Length: Sufficient reach for awkward or elevated test points.
Ideal For
Flue test points in confined boiler cupboards or restricted access areas.
Flues positioned at awkward angles where a straight probe can't achieve a clean insertion.
Gas Safe registered engineers regularly testing flues with difficult access.
Replacing a worn or damaged bent probe on an existing Anton Sprint Pro kit.
If your flue test points have straightforward, direct access, the standard straight probe (C03738) is the more appropriate — and typically lower-cost — option.
Why Buy This Product?
The 90° bend solves a genuine access problem that a straight probe simply can't — flue ports tucked into tight boiler cupboards or set at awkward angles against a wall. It carries over the same stainless steel construction, thermocouple and two-stage water trap and filtration system as the straight version, so accuracy and sensor protection aren't compromised for the sake of access.
Order the Anton C03738-B Pro Bent Flue Gas Probe online today. The straight version (C03738) is also available for standard access points.
Specification
Anton C03738-B Bent Pro Flue Gas Probe Specification
Brand
Anton by Crowcon
Model
C03738-B
Compatibility
Anton Sprint Pro Flue Gas Analysers
Probe Configuration
90° Bend
Shaft Material
Stainless Steel
Thermocouple
Built-In
Insertion Length
250mm, Adjustable Depth Gauge
Hose Length
2164mm
Filtration System
In-Line Water Trap, Water Block, Dust Filter
Connection Type
Bespoke Connector with Secondary Water Block Filter
Grip Design
Ergonomic
Features
Anton C03738-B Bent Pro Flue Gas Probe Features
90° Bend: Accesses flue ports and test points a straight probe can't reach due to restricted space or awkward positioning.
Compatible with Anton Sprint Pro Flue Gas Analysers: Fits the Sprint Pro range.
Stainless Steel Shaft with Built-In Thermocouple: Durable construction with integrated temperature measurement.
