Rinnai fanned Convection powered flue heaters employ the lastest technology, and are the most advanced on the market today. The heaters are fitted with a small powered flue, to improve efficiency, and allow flexibility in positioning Since their introduction, over 1 million Rinnai have been sold worldwide. Churches throughout UK, have been benefiting for over 25 years from choosing Rinnai, as a safe reliable source of heat.
The Rinnai heaters are manufactured in Japan and, as you would expect, have a modern appearance and advanced technology, together with high efficiency and relaibility.
Features & Benefits
* Flame failure protection.
* Fully modulating fans and burner
* Automatic ignition
* Flexible flue extension system
* Suitable for central timer control
* Fan assisted flue
* Remote control (566 FTR only)
* Low noise levels
* Floor standing
* Stainless Steel heat exchanger
* Warm air at floor level
* Self diagnostic - fuzzy logic
* Integral air filters
Rinnai 566T/556FTR
Input 6.4kW/21837 BTU/H
Output 5.2kW/17742 BTU/H
Height 554mm
Depth 250mm
Width 750mm
Standard flue 240mm - 400mm
Alternative flues to fit walls: 75mm - 1000mm
Flue hole diameter 80mm
Flue extension available to allow the 556 heaters to be fitted with a maximum flue length of 4.5 mtrs (3 bends) to reach the outside wall. FTR model incorporates a 24 hour timer and remote control.
