The Rinnai Infinity HD70i Gas walled mounted heater is the latest addition to Rinnai's large scale industrial water heater range. The HD70i is designed for internal installation and has an impressive flow rate of 960 litres/hr at 50°C temperature rise.
The HD70i is able to provide an almost endless supply of hot water, temperature accurate to within 1°C and shares all the benefits of other water heaters available from Rinnai.
In addition, the HD70i showcases several new technological features including a status monitor to allow you to easily see temperature settings and check for error messages. Digital temperature and bath fill controls can be added in addition, all deigned to increase user control and comfort.
The Rinnai HD70i features two independent parallel connections on the top of the heater. One for exhaust gases, one for combustion air intake. However Rinnai's innovative flue design means that although there are two connections you still only need one opening through the wall.
The HD70i has no temperature sensitive internal parts meaning hot water can be returned to it. This is especially useful for secondary returns in commercial buildings.
Rinnai Gas Water Heater information...
Rinnai Infinity HD70i Flue Options...
Installation - Internal wall mounted
Height (A) - 600mm
Width (B) 470mm
Depth (C) - 220mm
Weight 29kg
Exhaust system - Forced exhaust
Temperature range - 37°C - 85°C
Ignition method - Direct electronic ignition
Gas consumption
- Natural gas 4.3kWh low - 69kWh max
- Propane 4.3kWh low - 69kWh max
Hot water delivery capacity - 24L/min raised 33°C
Min operating water flow - 2.4L/min
Nominal operating pressure - 1 - 10 bar
Power supply - AC 230 V (50Hz)
Electrical consumption - 83 W.
>Maximum flue length is 15m less 2m per bend, up to a maximum 4 bends
Currency Converter
Please Select:
|
|
